IMS brakes

ZeroGravity58

Well-known member
Mar 23, 2008
1,420
54
48
40
Maryland
I know they are a little pricey but has anyone ran these? Was searching the web and stumbled across them but can't find much on them. They make a 16" vented front but only a non vented rear setup. According to their website the weight saving is significant.
 

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
23,033
8,045
113
Phoenix Az
Had them on the cummins i helped build. Very light and nothing bad to say about them. 6k lbs truck making 2300 hp at the time
 

ZeroGravity58

Well-known member
Mar 23, 2008
1,420
54
48
40
Maryland
Did you run on the street at all? Their vented setup for the Duramax says track only but the same cummins setup says street/race. I run my truck on the street alot. I don't see the vented setup being a problem. The non vented for the rear I don't see being a problem as the aren't getting the abuse the front it. My truck will be down for awhile so I was kicking the idea around maybe at least doing the rears
 

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
23,033
8,045
113
Phoenix Az
By that point, that truck was track only. We did have a parachute issue a couple times and those brakes held up and stopped it. Never had a warping issue. Truck was a 8 sec truck consistently
 

Bbuchanan11

Active member
Sep 9, 2011
324
179
43
Sarver, PA
I have them all the way around on an 06 rclb front and back are vented street rotors. You will lose your emergency brake if you tow or need inspection just a heads up