How much pulse to be around 650hp?

monster50iii

monster50iii

Member
Dec 5, 2014
339
11
18
I ordered a 10mm pump today. With my stock cp3 I made 580hp at danville with stock sticks and his 3794. I have this same cp3 maxed out with the new 60% lbz tipped injectors from DDP. im holding 185-190mpa at 2100us right now. Just seeing what everyone's thoughts are to reach 650hp? Thats all I want, I don't need an catastrophic failures lol
 
OleBlackyLBZ

OleBlackyLBZ

Active member
May 22, 2020
353
86
28
With stock injectors and a danville 3794 my lbz put down exactly 580 on a 2400us tune. Pistons lasted about 30,000 miles, If I remember correctly It's 2100 or 2200us with these new 45% Injectors and it makes between 650-700.
 
Last edited:
monster50iii

monster50iii

Member
Dec 5, 2014
339
11
18
I know at 2100us I'm maybe around 600hp.. it feels a bit more than the stock injectors but not much. I suppose the new sticks don't return as much fuel.
 
gmduramax

gmduramax

Shits broke
Jun 12, 2008
4,185
326
83
Nor cal
monster50iii said:
I ordered a 10mm pump today. With my stock cp3 I made 580hp at danville with stock sticks and his 3794. I have this same cp3 maxed out with the new 60% lbz tipped injectors from DDP. im holding 185-190mpa at 2100us right now. Just seeing what everyone's thoughts are to reach 650hp? Thats all I want, I don't need an catastrophic failures lol
Click to expand...

2400 pulse should get you close. You’re already in the danger zone tho
 
monster50iii

monster50iii

Member
Dec 5, 2014
339
11
18
I'm hoping with the 60% lbz (or 80% lmm) Stix, things stay happy near 650. Ill probably start at 2250 or so and see how things feel. I'll keep timing very conservative
 
S

S Phinney

Active member
Aug 15, 2008
4,008
18
28
Quncy, Fl
It all will depend on the turbo you are using. On a 50 over S466 I made 742 at 2200 usec. Stock engine lb7.


Sent from my iPhone using Tapatalk
 
Bdsankey

Bdsankey

Vendor
Vendor/Sponsor
Feb 1, 2018
4,817
1,863
113
Larsen, Wisconsin
gmduramax said:
Torque shouldn't be a problem for him, those pistons on the other hand
Click to expand...

Duh, for some reason I thought it was 01-05. Probably should’ve figured it out when he said LBZ tipped injectors. Horse a piece, piston failure or custom short rods both suck.


Sent from my iPhone using Tapatalk
 
gmduramax

gmduramax

Shits broke
Jun 12, 2008
4,185
326
83
Nor cal
Bdsankey said:
Duh, for some reason I thought it was 01-05. Probably should’ve figured it out when he said LBZ tipped injectors. Horse a piece, piston failure or custom short rods both suck.


Sent from my iPhone using Tapatalk
Click to expand...

I’d still drive it with bent rods ?
 
monster50iii

monster50iii

Member
Dec 5, 2014
339
11
18
You guys act like I'm shooting 700+ hp lol. There's guys making 620-660 on stock sticks. These 60's should really help save things. A 2250us tune with a max of 18* or so at 195mpa or so shouldn't be too destructive hopefully.
 
Dozerboy

Dozerboy

Well-known member
Jun 23, 2009
5,088
683
113
TX of course
gmduramax said:
Torque shouldn't be a problem for him, those pistons on the other hand
Click to expand...
It’s still cylinder pressure. Weather it saves the rods or the pistons it’s a win. I ain’t cracked a piston at 1100tq, so I’ll shoot for 700hp and 1000tq. My truck ain’t my daily though so if I break something I have time to fix it. Hopefully it don’t come to that any time soon. Maybe I’ll make it to 1000hp....for one pass....lol
 
monster50iii

monster50iii

Member
Dec 5, 2014
339
11
18
I may have to get it on a dyno for a day and get it where I want it. Jags Pro Truck shop might be an option.
 
You must log in or register to reply here.
Top Bottom