how low and wide can you go?

[NinjaMax]

I'm pulling off my lift and want to drop the front down all the way(no bolts) and run the stock rear suspension.. my question is how wide and big of a tire can I run without hacking up too much plastic..I've already cut some to cleat 37's so far with the lift..plus I want to be wide enough so I'm even with my flares..

 

[NinjaMax]

bump for 20/9 rims -12mm offset and 4.5 backspacing..will that fit pretty well or too much bs?

 

[brandon06dmax]

put 305 50 20 nitto 420s on and call it a day

 

[NinjaMax]

nuf said...ill post some pics after its lowered with some new rims and tires

 

[03Dirtymax]

I use to have the exact setup your looking for thats bolts out 2in shackles and overload removed 20x9 fuel hostages -12 offset 305/50/20 nitto 420s

Sent from my DROID BIONIC using Tapatalk

 

[NinjaMax]

Thats the exact stance im going for...whats your rim offset/baskspacing?

 

[03spoolindmax]

I use to have the exact setup your looking for thats bolts out 2in shackles and overload removed 20x9 fuel hostages -12 offset 305/50/20 nitto 420s

Sent from my DROID BIONIC using Tapatalk

^^

 

[03Dirtymax]

Thats the exact stance im going for...whats your rim offset/baskspacing?

I don't have them anymore I believe the backspace was 4.5 and I know they were -12 offset they didn't rub at all besides on the bumper a bit I have 20x10 -21 offset now I had to put it to stock with slight tbar crank

Sent from my DROID BIONIC using Tapatalk

 

[03Dirtymax]

Here's how she sits now I cut alot so I'd keep decent cv angles

Sent from my DROID BIONIC using Tapatalk

 

[Devon]

I had 20x10's with a -19 offset and 305/50's on my old Lly 3/5 dropped


Sent from my iPhone using Tapatalk

 

[Xternal]

Any pics Devon. I'm debating pulling my bolts out and I'm running 20x10 -21 with 4.5 bs. Trying to see if 305 50 20 will work. Gmc so I have a little more trim room on the bumper then Chevy

 

[zach_carver]

20x10 -24mm offset with 305/50R20s. Bolts not completely removed. Drop shackles in rear.

 

[Xternal]

Looks good any front on shots to see how far the tire sticks out. Two inch drop in the rear

 

[zach_carver]

Im not sure but I believe there 3" drop shackle. Idk maybe 2". Not my truck one of my buddys.

 

[Xternal]

Ah ok thanks looks killer

 

[Mxmike800]

ill be on 20x12 -44 305/50 nitto 420s if they ever come in... dam backorder!! also in the process of putting the truck on air all 4 corners.

 

[Moneywellspent]

Sorry to hijack but what would be an ideal suspension setup with 305/40/22 -24? I've seen a few trucks with that setup but never really seen them with drop shackles and torsion bars out

 

[snowman]

For what it's worth. This is mine with bolts almost out and 3 inch drop in rear.

 

[snowman]

Those are 305/50/20 20x9 bmfs

 

[Andrew]

subd im doing the same once the motor is back in the truck