Front diff torque specs

[GrammRT9]

Hey guys I was doing my steering box yesterday and decided it was time to drop the front diff and re seal it to stop an annoying leak. Got everything apart and halves back together clean and sealed but haven't been able to find any torque specs for the casing. I was going to buy a Haynes but aside from the tech book for just the engine all I can find is for a 99-06 Silverado/gmc it says gasoline engines on it but would it have the information I'm looking for, for everything else? If anyone has the specs I need I'd greatly appreciate it! Hopefully this is in the right section.


Sent from my iPhone using Tapatalk

 

[fc8464]

Fastener Specifications
Fastener Tightening SpecificationsApplication
Specification
Metric
English
Differential Adjuster Lock Nut Bolt
20 Y
15 lb ft
Differential Carrier Assembly Case Bolts
47 Y
35 lb ft
Differential Carrier Bracket to Frame Nuts
90 Y
67 lb ft
Differential Carrier Assembly Mounting Bolts and Nuts
100 Y
75 lb ft
Front Differential Carrier Shield Bolts
20 Y
15 lb ft
Front Drive Axle Actuator
20 Y
15 lb ft
Inner Shaft Housing to Bracket Nuts
100 Y
75 lb ft
Inner Shaft Housing to Differential Carrier Assembly Bolts
40 Y
30 lb ft
Pinion Shaft Lock Bolt, 9.25" axle
53 Y
39 lb ft
Plug, Drain and Fill
33 Y
24 lb ft
Ring Gear Bolts, 8.25” Axle
120 Y
89 lb ft
Ring Gear Bolts, 9.25” Axle
138 Y
102 lb ft
Stabilizer Link Nut
18 Y
13 lb ft
Vent Hose Connector
28 Y
21 lb ft
Wheel Drive Shaft Inboard Flange Bolts
79 Y
58 lb ft
Wheel Drive Shaft to Front Hub Nut
240 Y
177 lb ft
Yoke Retainer Bolts
25 Y
18 lb ft

 

[GrammRT9]

Thank you for the fast response!! Very much appreciated! Was just about to go and search for a manual guess I'll throw the covies back on! Lol


Sent from my iPhone using Tapatalk