Fass 260

[Troysalm71]

I've got a fass 260 for the time being on my truck til I swap a 150 on. Curious I can only get this thing to dial down to say around 14-15 pounds. Is Thai okay any more an it will just want to slam the check ball an pop fuse. If this is okay the. Great. The cp4 was taking 30 pounds an never had a prob so I'm assuming this fleece pump would be okay with 14-15?

 

[Cknight199]

8-10lbs is actually all the cp3's need. Any more and you risk blowing the FCA's open and causing the truck to lope or create higher rail pressure at idle


Sent from my iPhone using Tapatalk

 

[Troysalm71]

Problem being that 260 dnt want to dial down that far. If I go cut the spring down further it wants to pop the fuse an slam the check ball into the pump. I guess I could get a lighter spring it's going to a forum member on here was just curious was all. Thanks