Dual cp3 pump wheel

[skintback]

Where do you guys get the custom billet dual cp3 pump wheel and how much? I can't find them anywhere for sale.

 

[05chevy]

Are you talking about a pulley?

 

[skintback]

yes the one that goes on the pump

 

[madmatt]

wcfab.com

 

[Burn Down]

You will most likely need the pump mounting bracket as well...

 

[blk smoke lb7]

Jason Werlie he is quadracer on here he makes the pullys

 

[coldLBZ]

This thread has some pics of the wcfab pulley:
http://www.duramaxdiesels.com/forum/showthread.php?t=39408
MPI is also working on dual CP3 kits, I don't know if the pulleys are available separately.

 

[TRUBBS]

What's the cost on just the pulley?

 

[flyinelvis11]

This thread has some pics of the wcfab pulley:
http://www.duramaxdiesels.com/forum/showthread.php?t=39408
MPI is also working on dual CP3 kits, I don't know if the pulleys are available separately.

mpi's wheels only fit the ppe kit as of a month ago. wcfab's pulleys fit the ats kit. which one do you have?

 

[Burn Down]

Wayne, how far off was the MDE pulley?

 

[flyinelvis11]

Wayne, how far off was the MDE pulley?

i never actually saw it myself, scott said it wouldn't work but from what i have seen with just the two pulleys i would guess there to be almost at least an half inch of offset toward the front of the motor on the ats pulley where as the mde pulley you had had no offset.

 

[blk smoke lb7]

Wayne, how far off was the MDE pulley?

A long ways the mde would most likly fit the ppe kit as the wheel is straight as the ats wheel is deep dished so to speakits due to the mounting bracket being set back so far on the Ats fuelersthe ppe is forwaed so the pulley will be straight inline

 

[blk smoke lb7]

The mde wheel was slightly larger also not sure how much diferance that makes.

 

[Burn Down]

MDE & PPE wheels are 1.1 ats is smaller and overdriven, not sure how much...

 

[flyinelvis11]

and overpriced...best i have found a wheel for is a hundred and a half...that reminds me, i gotta call jason and ask him to bring it to byron if he is still going

 

[blk smoke lb7]

and overpriced...best i have found a wheel for is a hundred and a half...that reminds me, i gotta call jason and ask him to bring it to byron if he is still going

Get on it slacker!

 

[quadracer37]

yes ill be at byron ill bring your wheel and some of mine to.
also have some nice stainless cp3 nuts to :woott:

 

[Evan@InglewoodTrans]

I should be getting a nice bracket and wheel in the near future

 

[quadracer37]

Yeah once my machinist gets me my parts!

 

[Evan@InglewoodTrans]

Damn machinists!