Dsp5 ?

[Dmax87]

Curious guys, my truck already is tuned and has dsp5 and I'm ready to load my dsp5 tunes in. Can I just do a cal flash or do I need to full flash back to stock and then full flash the my dsp in? Thanks

 

[coalroller83]

If it already has the DSP5 OS, just cali flash it.


LB7 CC SB, Stroker CP3, 30% nozzles, AirDog II 200, PPE Stage V Trans, EFI Live DSP5, Turbonetics Intercooler, to name a few...

 

[catman3126]

Were they just modified or is it a Different OS then you had originally? If the OS is different then do a full flash.

 

[Dmax87]

Ill have to compare the 2 later this afternoon. I basically found my stock file over on dp, compared all the crucial info, then saved the stocker and then converted to dsp5. Not working off of current tunes. Not sure if this helps much. Thanks

 

[Dmax87]

Os numbers are the same

 

[whytry]

If there different tunes all together I would full flash to be sure all the table align

 

[Dmax87]

If there different tunes all together I would full flash to be sure all the table align

So full flash just my dsp5 into it?

 

[Dozerboy]

yes

 

[catman3126]

yeah do a full flash

 

[SSchmi5519]

I would rec a full flash, it's too easy to skip and only takes another 3-4minutes..

 

[Dmax87]

Ok thanks guys ill give it a shot