Compressor wheels

[maine04max]

Do any of the more experienced guys have thoughts on these new s300 etr wheels?

my setup is twins with htt66 ss16cm with s480 and both have race covers .

I have toyed with the idea of getting a new 66 etr wheel or maybe changing the 480 wheel to a billet etr wheel if they even make one .

Im not sure which one would be best option and if i would see much difference .I briefly talked to a turbo vendor on the 66 and was told $750 for the whhel and would see a big gain

 

[custom8726]

Interested in this aswell, subscribing :hello:

 

[SDP]

The billet 80mm would be a good investment, they run around $450 depending on where you get it from. Spoolup is definitely better with this wheel and seems to flow more on the top as well. I haven't seen any maps on them yet though.

 

[Brayden]

Ditto on the Billet 80... Don't spend that kind of money on an S300 wheel. I can set you up with the billet 66mm wheel we just made 785hp with for 450.00

 

[maine04max]

ill definitely be in touch in the spring after work starts back up

 

[bullfrogjohnson]

I have heard the ETR wheels are very prone to surging. If that is true I would not want to put one on a S300. Those shafts wont take much abuse.

 

[mainer]

brayden


now for us guys running 475 twins, is it worth it to go to a billet 75m wheel? how does the billet 75 compare to a cast 80? as far as spool and power etc

or would it be wiser to go straight to a billet 80 wheel? basically where is the most gain for dollar going to be seen?

 

[SDP]

I've ran the billet wheel on an s475 for a bit now and the spoolup is a little better, it was already near instant before I put it on though. That's all I can really say about it so far, its been rain and snow here for the last month so not much testing to be done.

 

[Norcaldrifter]

Are we talkin bout the new efr turbos?

 

[maine04max]

not the new turbos .... just the billet wheels that can be installed in the older turbos