Any allison builders in GA

[Bfox111]

Im looking to get my transmission built. Does anyone have experience with anybody in the state of GA? Thanks! I tried to get trey fox's number from someone but it never came through...

 

[Fastorange]

hes on here give him a chance too see your post...

 

[blk smoke lb7]

He is blackdirtymax on here i believe

 

[dordtrecht5]

DTS. They are a vendor here. At least I think they're in Georgia.

 

[blk smoke lb7]

DTS. They are a vendor here. At least I think they're in Georgia.

Dallas does 770Johnny do transmissions?He is in Georgia isn't he?

 

[dordtrecht5]

No, I don't think he messes with them, but yes, he is in Georgia.

 

[yellowchevy]

If you want Trey's number send me a PM, I've got it.
I got my kit from him. He's an extremely busy one man operation.

Yellowchevy

 

[JDub]

I'd call David at DTS

 

[Duraeater6.7]

I'd call David at DTS

I wouldn't


Twinned Lmm 120 over pump 100hp injectors

 

[Duraeater6.7]

Trey fox no doubt


Twinned Lmm 120 over pump 100hp injectors

 

[Harbin_22]

I wouldn't


Twinned Lmm 120 over pump 100hp injectors

Why not?

He built mine, which went 7.20's on a stock engine in the 1/8 and I have beat on it a lot with no problems.

He built Ryan Funks which went 6.90's 1/8 and 11.0's 1/4 on a stock engine a bunch of times and clicks shifts off like clockwork.

Don't know what your problem is with David but I really get tired of you bashing him. He is a vendor on this site, Trey is not

 

[BUST'EM 504]

Trey fox built mine been doing fine for three ueard

 

[BUST'EM 504]

Years sorry

 

[Duraeater6.7]

Why not?

He built mine, which went 7.20's on a stock engine in the 1/8 and I have beat on it a lot with no problems.

He built Ryan Funks which went 6.90's 1/8 and 11.0's 1/4 on a stock engine a bunch of times and clicks shifts off like clockwork.

Don't know what your problem is with David but I really get tired of you bashing him. He is a vendor on this site, Trey is not

I just stated my opinion no bashing here


Twinned Lmm 120 over pump 100hp injectors

 

[Duraeater6.7]

Why not?

He built mine, which went 7.20's on a stock engine in the 1/8 and I have beat on it a lot with no problems.

He built Ryan Funks which went 6.90's 1/8 and 11.0's 1/4 on a stock engine a bunch of times and clicks shifts off like clockwork.

Don't know what your problem is with David but I really get tired of you bashing him. He is a vendor on this site, Trey is not

You stated yours that's what he asked for


Twinned Lmm 120 over pump 100hp injectors

 

[04D_MAX]

jeff garmon did mine, hes out of griffin, ga. Had it over 3 years hasn't skipped a beat

 

[blue09dmaxx]

Trey fox

 

[Swisstyphoon]

What about Suncoast in Ft. Walton Beach FL?
Not far from the GA state line...

 

[crazycrew]

Trey fox built the one in my old Lilly! 2.5 years! No problems!

 

[sickdiesel]

Defiantly let Trey do it instead of DTS!