I found a Oring which measures about 3 1/2 " and I am trying figure out where it goes. Left over parts are never a good thing. I had some help taking things apart. Any ideas I would greatly appreciate the help
Thanks
Thanks
2015 LML random o-ring after doing deletes.
- Thread starter Muleskinner
- Start date
Moved to LML section and shortened up the title.
Considering I dont know the LML, the only thing I can think of is possibly an oring on the turbo inlet? Did you have to take the airbox and pipe off when you deleted the EGR parts?
Considering I dont know the LML, the only thing I can think of is possibly an oring on the turbo inlet? Did you have to take the airbox and pipe off when you deleted the EGR parts?
If not the turbo inlet, check if the seal is in place at for this pipe. It's an Oring if my memory serves correctly.
What Lenny and Woody said. ^^^^^^ 
Thanks guys for the reply. I did pay close attention to o-ring on the intake tube. As far as the air filter cubes I will check every connection. Thanks guys