1/8 mile discussion and time slips post here!

TheBac

Why do I keep doing this?
Staff member
Apr 19, 2008
13,711
177
63
Mid Michigan
Hey Jerry! How ya been?

I was finding that 6.99 would put quite a few 10.70+ trucks on this list. I wasnt sure just how "exclusive" you all wanted this to be, so I didnt include them. Ive got to go over to CompD and look for any relevant ones, too.

The trick will be to find some of the older times. That'll mean going back to DP and searching.....
 
  • Like
Reactions: rmallen30

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
17,812
255
83
Phoenix Az
Hey Jerry! How ya been?

I was finding that 6.99 would put quite a few 10.70+ trucks on this list. I wasnt sure just how "exclusive" you all wanted this to be, so I didnt include them. Ive got to go over to CompD and look for any relevant ones, too.

The trick will be to find some of the older times. That'll mean going back to DP and searching.....
Lets set it up at 6.699 and faster. Seems like a good area to start at and see where it goes from there.
 

coker6365

Coker6303's ***** Daddy
Dec 4, 2011
485
16
18
Don't mind the 1/4 mile info, lost a waterpump and blew coolant everywhere on the brakes at the big end. Lol. 06 LBZ, 5700lbs, Josh Harris tuning, Allison, Fuel Only.


Sent from my SM-G975U1 using Tapatalk
 

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
17,812
255
83
Phoenix Az
hold off on posting your slips for right now. ill get the forum sections setup next week and thread going for all that. dont want to loose it in this thread.
 

coker6365

Coker6303's ***** Daddy
Dec 4, 2011
485
16
18
10-4. I was just excited that a measly 6.5 was going to make the cut.

Sent from my SM-G975U1 using Tapatalk
 
  • Haha
Reactions: Chevy1925

TheBac

Why do I keep doing this?
Staff member
Apr 19, 2008
13,711
177
63
Mid Michigan
Added a few more. I went back to mid-2017, roughly post 1810.

Coker, when was that run done? I found your last one from a couple years ago.



NGM Diesel Dragster - 4.166 @ 174.16 (6/23/18) - 2500 lbs, Turbo 400 - NGM Diesel
Black Lightning Pro Mod - 5.671 @ 129.19 (6/6/20) - 3445 lbs, LLY, Allison 2wd - Mark Broviak, Evan Drosehn
Tony Burkhard/DHD - 5.851 @ 113.48 (7/29/18) - 5500 lbs, LBZ - Mark Broviak
Nathan Bandstra - [email protected] 123.86 (8/7/20) - 5950 lbs, LLY, Allison - UDT
J Hyatt - 6.067 @ 120.71 (5/8/18) - 6300 lbs, LB7 - Ridgerunner
Ryan Pini - 6.151 @ 118.94 (8/24/19) - 4360 lbs, LLY - Mark Broviak
Rick Fletes Chevelle - 6.208 @ 113.55 (8/2/20) - 4500 lbs, LB7, TH400/GearVendors - RF Garage
Adam Hull - 6.288 @ 121.49 (7/8/18) - 5500 lbs, LLY, Allison, Mark Broviak
JKlennon - 6.303 @ 112.22 (5/1/19) - 5100 lbs, LBZ - Mark Broviak
Cole Gunder - 6.355 @ 113.75 (6/25/20) - LB7, 5800 lbs, Nick Stamm
Justin Duffy - 6.377 @ 110.52 (5/23/20) - 6450 lbs, LLY - UDT
Ne-max - 6.383 @ 116.16 (5/6/18) - 5950 lbs, LBZ - Mark Broviak
Prostreeter600 - 6.407 @ 108.55 (11/11/16) - 6000 lbs, LBZ - Mark Broviak
DBreschLB7 - 6.444 @ 109.98 (6/20/19) - 5700 bs, LB7 - HTPerf
Mike Maas - 6.527 @ 114.22 (9/9/20) - 6000 lbs, LB7 - Mark Broviak
Diesel Addiction Shop Truck - 6.567 @ 106.28 (10/25/17) - LBZ - Diesel Addiction
Blake Crenshaw - 6.614 @ 104.90 (6/19/20) - 6250 lbs, LB7 - UDT
dmaxdrid - 6.617 @ 106.66 (2/17/18) - 6700 lbs, LBZ, Allison - All in Truck Performance
Manuel Vierra - 6.621 @ 107.88 (10/10/20) - 6400 lbs, LBZ - Mark Broviak
Boosted_LBZ - 6.665 @ 107.09 (5/17/17) - 6380 lbs, LBZ - ATP
Trace Wilks - 6.671 @ 109.80 (6/20/20) - 6700 lbs, LBZ, 48RE - UDT
Brandon Serpa - 6.675 @ 104.01 (10/10/20) - 5900 lbs, LMM - Mark Broviak
Coker6365 - 6.676 @ 106.28 (8/17/18) - 6400 lbs, LBZ - Josh Harris


6.69 will include many trucks that run 10.50-ish in the 1/4. That's 75 vehicles, guys......
 
Last edited:

gmduramax

Shits broke
Jun 12, 2008
3,684
27
48
Nor cal
Just to stir the pot. I don’t like 1/8 mile, but if it’s “safer” and too expensive to go 1/4 mile. The list should start at 5.99 🤷‍♂️
 

coker6365

Coker6303's ***** Daddy
Dec 4, 2011
485
16
18
Added a few more. I went back to mid-2017, roughly post 1810.

Coker, when was that run done? I found your last one from a couple years ago.



NGM Diesel Dragster - 4.166 @ 174.16 (6/23/18) - 2500 lbs, Turbo 400 - NGM Diesel
Black Lightning Pro Mod - 5.671 @ 129.19 (6/6/20) - 3445 lbs, LLY, Allison 2wd - Mark Broviak, Evan Drosehn
Tony Burkhard/DHD - 5.851 @ 113.48 (7/29/18) - 5500 lbs, LBZ - Mark Broviak
Nathan Bandstra - [email protected] 123.86 (8/7/20) - 5950 lbs, LLY, Allison - UDT
J Hyatt - 6.067 @ 120.71 (5/8/18) - 6300 lbs, LB7 - Ridgerunner
Ryan Pini - 6.151 @ 118.94 (8/24/19) - 4360 lbs, LLY - Mark Broviak
Rick Fletes Chevelle - 6.208 @ 113.55 (8/2/20) - 4500 lbs, LB7, TH400/GearVendors - RF Garage
Adam Hull - 6.288 @ 121.49 (7/8/18) - 5500 lbs, LLY, Allison, Mark Broviak
JKlennon - 6.303 @ 112.22 (5/1/19) - 5100 lbs, LBZ - Mark Broviak
Cole Gunder - 6.355 @ 113.75 (6/25/20) - LB7, 5800 lbs, Nick Stamm
Justin Duffy - 6.377 @ 110.52 (5/23/20) - 6450 lbs, LLY - UDT
Ne-max - 6.383 @ 116.16 (5/6/18) - 5950 lbs, LBZ - Mark Broviak
Prostreeter600 - 6.407 @ 108.55 (11/11/16) - 6000 lbs, LBZ - Mark Broviak
DBreschLB7 - 6.444 @ 109.98 (6/20/19) - 5700 bs, LB7 - HTPerf
Mike Maas - 6.527 @ 114.22 (9/9/20) - 6000 lbs, LB7 - Mark Broviak
Diesel Addiction Shop Truck - 6.567 @ 106.28 (10/25/17) - LBZ - Diesel Addiction
Blake Crenshaw - 6.614 @ 104.90 (6/19/20) - 6250 lbs, LB7 - UDT
dmaxdrid - 6.617 @ 106.66 (2/17/18) - 6700 lbs, LBZ, Allison - All in Truck Performance
Manuel Vierra - 6.621 @ 107.88 (10/10/20) - 6400 lbs, LBZ - Mark Broviak
Boosted_LBZ - 6.665 @ 107.09 (5/17/17) - 6380 lbs, LBZ - ATP
Trace Wilks - 6.671 @ 109.80 (6/20/20) - 6700 lbs, LBZ, 48RE - UDT
Brandon Serpa - 6.675 @ 104.01 (10/10/20) - 5900 lbs, LMM - Mark Broviak
Coker6365 - 6.676 @ 106.28 (8/17/18) - 6400 lbs, LBZ - Josh Harris


6.69 will include many trucks that run 10.50-ish in the 1/4. That's 75 vehicles, guys......
Looks like Jan 2019 according to the date stamp. It was right before we had to put the body back on for DPC. That was the last time it's been on a track with slicks.

Sent from my SM-G975U1 using Tapatalk
 

lutzjk913

Active member
May 5, 2010
1,386
23
38
groveport, ohio
Just to stir the pot. I don’t like 1/8 mile, but if it’s “safer” and too expensive to go 1/4 mile. The list should start at 5.99 🤷‍♂️
1/4 mile racing is where it’s at.

when they starting cutting the radial guys back to 1/8th along with the pro mod and outlaw guy it sucked. But also at the same time they can lean on stuff harder. Lol.
 

TheBac

Why do I keep doing this?
Staff member
Apr 19, 2008
13,711
177
63
Mid Michigan
Went back 7 years on CompD and only found one new slip.



NGM Diesel Dragster - 4.166 @ 174.16 (6/23/18) - 2500 lbs, Turbo 400 - NGM Diesel
Black Lightning Pro Mod - 5.671 @ 129.19 (6/6/20) - 3445 lbs, LLY, Allison 2wd - Mark Broviak, Evan Drosehn
Tony Burkhard/DHD - 5.851 @ 113.48 (7/29/18) - 5500 lbs, LBZ - Mark Broviak
Nathan Bandstra - [email protected] 123.86 (8/7/20) - 5950 lbs, LLY, Allison - UDT
J Hyatt - 6.067 @ 120.71 (5/8/18) - 6300 lbs, LB7 - Ridgerunner
Ryan Pini - 6.151 @ 118.94 (8/24/19) - 4360 lbs, LLY - Mark Broviak
Rick Fletes Chevelle - 6.208 @ 113.55 (8/2/20) - 4500 lbs, LB7, TH400/GearVendors - RF Garage
Adam Hull - 6.288 @ 121.49 (7/8/18) - 5500 lbs, LLY, Allison, Mark Broviak
JKlennon - 6.303 @ 112.22 (5/1/19) - 5100 lbs, LBZ - Mark Broviak
RayRoss42 - 6.323 @ 115.62 (10/18/19) - 5200 lbs, LBZ - C Budihar
Cole Gunder - 6.355 @ 113.75 (6/25/20) - LB7, 5800 lbs, Nick Stamm
Justin Duffy - 6.377 @ 110.52 (5/23/20) - 6450 lbs, LLY - UDT
Ne-max - 6.383 @ 116.16 (5/6/18) - 5950 lbs, LBZ - Mark Broviak
Prostreeter600 - 6.407 @ 108.55 (11/11/16) - 6000 lbs, LBZ - Mark Broviak
DBreschLB7 - 6.444 @ 109.98 (6/20/19) - 5700 bs, LB7 - HTPerf
Mike Maas - 6.527 @ 114.22 (9/9/20) - 6000 lbs, LB7 - Mark Broviak
Diesel Addiction Shop Truck - 6.567 @ 106.28 (10/25/17) - LBZ - Diesel Addiction
Blake Crenshaw - 6.614 @ 104.90 (6/19/20) - 6250 lbs, LB7 - UDT
dmaxdrid - 6.617 @ 106.66 (2/17/18) - 6700 lbs, LBZ, Allison - All in Truck Performance
Manuel Vierra - 6.621 @ 107.88 (10/10/20) - 6400 lbs, LBZ - Mark Broviak
Boosted_LBZ - 6.665 @ 107.09 (5/17/17) - 6380 lbs, LBZ - ATP
Trace Wilks - 6.671 @ 109.80 (6/20/20) - 6700 lbs, LBZ, 48RE - UDT
Brandon Serpa - 6.675 @ 104.01 (10/10/20) - 5900 lbs, LMM - Mark Broviak
Coker6365 - 6.676 @ 106.28 (8/17/18) - 6400 lbs, LBZ - Josh Harris
 

D_Ferrante801

I hate everyone.
Apr 2, 2019
47
16
8
Zach Fuller- 6.503 @ 7600 lbs 4/21/17
ii Diesel - 6.402 @ 6040 lbs 8/22/15

Both Tuned by Zach @ Starlite Diesel. Trying to dig for some other from back in the day via Chavis Truck back in the day since thats been low 6s as well but cant find slips on his.
 

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
17,812
255
83
Phoenix Az
IMHO, if the slip is 2014 and older, we leave it out as we build the list. Id like to see this as a more relevant list since it will see more active running trucks setup more for 1/8 mile. The older trucks have their glory on the 1/4 mile. 1/8 should be more action filled imho. IF the list fills to an amount of trucks that is too long and we have a whole lot of retired trucks, we can discuss purging retired trucks, creating a nostalgia list for them only or something else.

Again, hold off on posting times. @TheBac, might want to create the list in the mod section for the time being till i get the forum up. Once thats running, no issues posting away. ill try to have that rolling tomorrow or wednesday.
 
  • Like
Reactions: D_Ferrante801

Users Who Are Viewing This Thread (Users: 0, Guests: 1)