Search results

Search the forum Search Articles
  1. DuramxMan

    Lb7 oil pump

    What do you mean by clearance? Does the pump have to be spaced out or what?
  2. DuramxMan

    Lb7 oil pump

    Putting lb7 back together and was wondering about oil pump and oil cooler. What is the best oil pump and oil cooler to put back on?
  3. DuramxMan

    Quality OBD2 splitter

    Bought one on Amazon bby-b6 for $10.90 and works good!
  4. DuramxMan

    Allison 5sp: 3.42 vs 3.73

    Can you still get 3.42? Last I looked they were not available!
  5. DuramxMan

    LB7 Pushrods

    Has stock springs and running 3300 rpm, but may turn that up. Replacing pistons with 0.020 over diamond cast pistons with valve reliefs. May need to change springs also?
  6. DuramxMan

    LB7 Pushrods

    Well rod broke and building another block and bent a few push rods. What are best push rods to buy. Motor pushing 800hp.
  7. DuramxMan

    Me and my Brand New 3500 Duramax

    How do you like the tailgate?
  8. DuramxMan

    LB7 Engine

    So LB7 shortblock is trashed and found an LLY priced right. Plan to use LB7 heads. Do I need to change anything on LLY shortblock to work with LB7?
  9. DuramxMan

    Welcome to Unleashed Duramax Tuning!

    Where are they located out of?
  10. DuramxMan

    Efi live

    I knew starlight has a book, but $319 seemed high. Guess you gotta pay to play!
  11. DuramxMan

    Efi live

    Purchased efi live and wondering where is best place to get training on proper use and tuning?
  12. DuramxMan

    Why go with a Van thermostat housing?

    Looks good! Think im gonna change mine!
  13. DuramxMan

    Why go with a Van thermostat housing?

    Why does everyone change these out?
  14. DuramxMan

    Transfer Case

    Well 250K and no telling how many 4wd launches and the T-case is in need of replacement. Where is best place to get a new T-case complete?
  15. DuramxMan

    launching in 2nd

    I do and like it. Truck does not spin tires as much and you get a better 60 ft!
  16. DuramxMan

    Drive Shaft Loops

    Zak did the shaft still come out or did it hold?
  17. DuramxMan

    Drive Shaft Loops

    Aluminum rear and steel front
  18. DuramxMan

    Drive Shaft Loops

    Wondering what everyone is running for driveshaft loops? Went to Crossville, Tn for ODSS and was told I need to have them when running slicks.
  19. DuramxMan

    L5P Shocks

    I also like the Rancho 9000, run on 3 empty and put rears on 9 loaded!
  20. DuramxMan

    Motor Swap-No Start

    Well thanks for all the input, but turns out the ECM was not getting ground and according to Mitchell on Demand it is on right rear and I do not remember a ground on right rear. One on drivers rear, 3 on drivers front engine and 3 on passenger side of engine. But tucked in behind passenger...
Top Bottom