Search results

Search the forum Search Articles
  1. franks71vw

    LB7: going to try do injectors 2002 lb7

    Brent's the man...
  2. franks71vw

    LB7 Coolant leak after engine is off??

    Drop dye in your reservoir, run truck and in the evening inspect with light.
  3. franks71vw

    P0088 P0193 LB7 after changing injectors

    Exactly, make sure everything is plugged in first. I started tearing my fpr out to replace with a used one and found the rail pressure sensor disconnected. Fixed
  4. franks71vw

    Cost of cut and coat pistons?

    Is so cal the only one that does this service?
  5. franks71vw

    Sheared pitman arm

    Not really true. I running 235/85 and just looking to strengthen the front end. I am going with sleeves as well and installing all new moog parts. It's the same reason people put lbz/lmm rods in stock lb7 just to strength the motor.
  6. franks71vw

    Sheared pitman arm

    Great now I find out about this after I order them and tie rod sleeves. I running 235s on a leveled 3500...
  7. franks71vw

    Efi Live advice

    Henry at COTN and Tony have some great tunes!
  8. franks71vw

    EFILive Tony at Ridgerunner and Henry at COTNP

    His tunes woke my truck up... Good stuff.
  9. franks71vw

    Free Merchant Automotive pump rub kit!

    oh well no worries you win some you lose some...
  10. franks71vw

    Transfer case grinding

    Did you get the pump saver plate listed on ebay or did you run a merchant auto?
  11. franks71vw

    Free Merchant Automotive pump rub kit!

    Can I order one still post business hours or is it too late got answering machine?
  12. franks71vw

    Phuk ups !!!!!

    Can't you drive to the US and drive it over...
  13. franks71vw

    Help! 03 GMC 2500HD A pillar speaker removal

    you need an adapter, remove your bleeder screw and notice that the sender is an 1/8 npt thread totally different. you will get restriction once the fuel hits the filter/CP3 and all the twist and turns the fuel takes shouldnt be a problem.
  14. franks71vw

    Help! 03 GMC 2500HD A pillar speaker removal

    First you need a lift pump to make positive pressure on the fuel system. The sender will send a signal to the gauge and tell it how to work. The pressure switch if you want to add can be done so as to install a tattletale light of the pressure drops under 5 lbs. I have the pressure switch so...
  15. franks71vw

    Help! 03 GMC 2500HD A pillar speaker removal

    I have the sender at my Fuel filter head And a pressure switch at my pump
  16. franks71vw

    LB7: Diagnosing bad FPR?

    FPR wire checl Sorry to ask such a dumb question but how did you find out you had a broken wire. I know the thread is old but just wanted to jump in as my fpr is maxing out after replacing injectors and she was running fine prior and wanted to rule out the wires.
  17. franks71vw

    Mobil 1 5W-40 for $12.99 a gallon

    36 gallons here, best Christmas gift ever...
  18. franks71vw

    LB7 Help! No Start After...

    Seems system has air, keep cranking and let starter cool, read somewhere that once you reach 600psi she will turn over seems your almost there... Also make sure all fuses etc are good to go.. Took me about 20 mins cranking on and off to get mine going...
  19. franks71vw

    Proper way of tightening?

    Hey guy's I know I am new here but what about using dye to pin point the possible leak?
  20. franks71vw

    Vinyl Wrap

    :thumb:
Top Bottom