Recent content by turbovan

  1. T

    Anyone have a scope pattern for the cam sensor? Have code p0341, no start after new engine.

    The engine was in an accident, the owner of the truck bought the engine and put a new front, rear cover and oil pan. I put heads on, rest of it, installed it, and it wouldn't start. Cam code.
  2. T

    Anyone have a scope pattern for the cam sensor? Have code p0341, no start after new engine.

    Fixed. Took the front cover back off after rechecking the wiring, trying another ecm. Missed it but the cam reluctor has a small dent which was obviously disrupting the signal. Put another wheel on, cover back on, fired right up. Was hard to see and yeah. :(
  3. T

    Anyone have a scope pattern for the cam sensor? Have code p0341, no start after new engine.

    Labscope stopped working, sigh. Checked all the wiring, pins, etc, all good. Pulled front cover, everything lined up, pins intact. Have ground, 5v reference at the connector. Gonna ship it off to another shop, I am out of ideas.
  4. T

    Anyone have a scope pattern for the cam sensor? Have code p0341, no start after new engine.

    Awesome, thanks Ron.
  5. T

    Anyone have a scope pattern for the cam sensor? Have code p0341, no start after new engine.

    I've done all that, checked teeth count and for damage, checked cam wheel for damage, both are tight and not bent. Crank pattern mint, cam pattern crap. Last piece of the puzzle is to see if the patterns line up, thus confirming I think the cam or crank gears broke the dowel and spun.
  6. T

    Anyone have a scope pattern for the cam sensor? Have code p0341, no start after new engine.

    Is that pattern with them in the correct sync? Haven't touched it since this post. Too busy. I'm thinking it broke a dowel.
  7. T

    Anyone have a scope pattern for the cam sensor? Have code p0341, no start after new engine.

    Nope. I wish.
  8. T

    Anyone have a scope pattern for the cam sensor? Have code p0341, no start after new engine.

    Thanks, if that's it, my cam isn't even chose to that.
  9. T

    Anyone have a scope pattern for the cam sensor? Have code p0341, no start after new engine.

    Just repowered a 2007 LBZ, customer brought me a supposedly running short block that had been hit, he put new covers on and front and rear. I put the rest together with new injectors, turbo, cp3 etc. Truck drove in. New engine won't start, It catches then nothing. I have code P0341. Tried know...
  10. T

    Anyone doing the 02 LB7 to LLY conversion harnesses?

    Ok finally got the brakes bled, fluids all topped up, trans cooler replaced and first test drive, WOW. This is insane, turbo literally lights up off idle and the power, damn. All these years with my slow LB7, hahaha. Oh, no tune either, idle lopes due to LMM fuel pressure reg. The 2 weeks of...
  11. T

    Anyone doing the 02 LB7 to LLY conversion harnesses?

    Tuner showed up, flashed the cal and bam, purrs like a kitten. Its eery how smooth and quiet it is. Still got more to do but at least it drives.
  12. T

    How do you adjust nsbu on an LLY?

    Searched and couldn't find it, some say to line up the marks but there isn't any, it has a cover over the front, AC Delco part. I put it it the middle of the adjustment, scanner says neutral or whatever gear I select, but even moving it while watching, it doesn't change. TIA.
  13. T

    Anyone doing the 02 LB7 to LLY conversion harnesses?

    Well, midnight last night, turned over but did the start and die, did the manual relearn of the vats but wouldn't learn, have 2 codes pertaining to it. Waiting for my tuner to show up and put in Ricks base cal to eliminate the theft system and other things
  14. T

    Anyone doing the 02 LB7 to LLY conversion harnesses?

    Ahh, haven't seen it but then I'm not around much. Great minds think alike :)
  15. T

    5 speed to 6 speed conversion.

    Interesting, so what your suggesting can work with an LB7. Hmm. I do have a LBZ valve body.
See more
Top Bottom