N2BRK's latest activity

  • N2BRK
    N2BRK reacted to 1FastBrick's post in the thread 2002 FE9 with Like Like.
    You will get the same response if you purchase from Rock Auto too. You have to go through Rock Auto so they can go back through there...
  • N2BRK
    N2BRK replied to the thread 2002 FE9.
    Interesting! I just got denied by Nik Caragianis of Mevotech because I bought them from Amazon, and he says Amazon and EBay are 3rd...
  • N2BRK
    N2BRK replied to the thread 2002 FE9.
    3 degrees. Just did a LOF and my driver’s side Mevotech TTX lower ball joint has a torn boot. Ugh. Maybe 12-15k on it. My OEM lowers...
  • N2BRK
    N2BRK replied to the thread 2002 FE9.
    Wrapped up after the rain stopped yesterday. I put Jack stands under the frame and hung the rear suspension. I then removed the pass...
  • N2BRK
    N2BRK replied to the thread 2002 FE9.
    Driver side is on. I decided to stop running the extensions. I looked it all over some more and they are slapping the hell out of the...
    • IMG_3291.jpeg
    • IMG_3293.jpeg
    • IMG_3292.jpeg
  • N2BRK
    N2BRK replied to the thread 2002 FE9.
    Well this is interesting: Hello Sir, Part #6654 is not going to work with the Fox shock. Part #6654 will only work with a Belltech...
  • N2BRK
    N2BRK reacted to Chevy1925's post in the thread 2002 FE9 with Like Like.
    Meh, ill bet thats all you need
  • N2BRK
    N2BRK replied to the thread 2002 FE9.
    I considered the possibility of bottoming out, but these are extending the shock and I've never heard of anyone with a 3" drop shackle...
  • N2BRK
    N2BRK replied to the thread 2002 FE9.
    I have 1/4” replacement brackets. I was thinking about hammering these flat pieces over and boxing them.
    • IMG_3279.jpeg
    • IMG_3278.jpeg
  • N2BRK
    N2BRK replied to the thread 2002 FE9.
    To clarify - the extenders change the location of the shock to work better after using the lowering shackles. Shorter shocks will not...
  • N2BRK
    N2BRK replied to the thread 2002 FE9.
    Looking at the pic, you’re right. One side broke long before the other apparently. Tue replacements are 1/4” and I’m going to box them.
  • N2BRK
    N2BRK reacted to TheBac's post in the thread 2002 FE9 with Like Like.
    Look at that rust where it broke. Those were cracked for a while, and the right one had broken. Sure you've got the correct length...
  • N2BRK
    N2BRK replied to the thread 2002 FE9.
    Similar to the other side’s failure from last year.
    • IMG_3275.jpeg
  • N2BRK
    N2BRK replied to the thread 2002 FE9.
    I’ll have to decide to either box them in, make new stronger ones, or maybe fabricate one piece stronger ones that have the extenders...
  • N2BRK
    N2BRK replied to the thread 2002 FE9.
    Other side this time. I’m thinking those shock extenders are putting too much leverage on the mount. Dunno. Rough week. Inspector...
Show older items
Top Bottom