Recent content by Harshman

  1. Harshman

    LBZ Fan Clutch

    I have this tool and works really well https://www.harborfreight.com/pneumatic-fan-clutch-wrench-set-58526.html?_br_psugg_q=fan+clutch+removal+tool
  2. Harshman

    Ever heard of Boostline rods before?

    Well that doesn't look heavy. I will look tomorrow and see what I have wrote down.
  3. Harshman

    Ever heard of Boostline rods before?

    The Callies rods are a good deal, but are heavy. I have used them at least twice and had to add heavy metal to the crank. Even the Callies cranks will need weight added. Looks like the Boostline rods are about the same weight as stock rods. So are Molnar rods. I will be using the Molnar rods...
  4. Harshman

    Engine Stand's and mounting options for a Duramax build

    I have machined and assembled a lot of short blocks for other shops. They always install the covers and oil pans themselves. So I bolt my stand to the back of the block. I will need to come up with another way soon as I will be doing some long blocks. I could do ass Tom says and take it off the...
  5. Harshman

    LBZ Block worth?

    I am interested. Depends on price and cost to ship.
  6. Harshman

    Increasing Rail Pressure to Control Idle Haze

    I drove mine for several thousand miles like that. Some of it pulling 12,000 lbs. Other than the smoke, smell and rough idle when hot it ran really well.
  7. Harshman

    It's HG time in the near future. Any recommendations on parts.

    I use the CMD lube instead of the ARP lube on everything I do.
  8. Harshman

    It's HG time in the near future. Any recommendations on parts.

    When you get the heads off check all the piston heights to make sure you didn't bend a rod from the hydro lock. Also sounds like you may have had coolant in the cylinders for long periods of time. Could have some rusty or etched cylinder walls.
  9. Harshman

    LML Knock and 150 psi

    Looks like it ate something? Is the head all beat up?
  10. Harshman

    Turbo down pipe

    Good to know thanks.
  11. Harshman

    Turbo down pipe

    The PPE looks like a flex pipe?
  12. Harshman

    Turbo down pipe

    I need to replace my down pipe. It was sealed to the exhaust pipe good but after taking it apart it's really rusty at the pipe connection and chunks falling off. What is the best fitting pipe I can get to replace it? 2002 LB7 with mild tune.
  13. Harshman

    Trans cooler

    Are the Mike L trans coolers still available? I put one in my 2002 about 2 years ago. Need one for a 2006 LBZ.
  14. Harshman

    Can someone confirm cam lobe order for me?

    Straub
  15. Harshman

    Can someone confirm cam lobe order for me?

    Here is a LML
See more
Top Bottom