Recent content by cumminsman202

  1. cumminsman202

    Stall converter

    Ok thanks
  2. cumminsman202

    Stall converter

    Could a wiring issues cause this, because I have other issues with the truck also. Being that when I unhook my rail pressure gauge from the sensor an plug the factor please gauge in by itself the truck will die.
  3. cumminsman202

    Stall converter

    Now I’m throwing a p0872 code I believe it’s the in the wiring. What do you guys think?
  4. cumminsman202

    Stall converter

    What do you want de-coded? The code thrown was P0880. What are the most common spots to look at for wire chafing? Or is their anything else I should check?
  5. cumminsman202

    Stall converter

    it doesn’t do it when I first start driving. It happens when I drive for about 15 minutes an it only does it in first gear when I start to take off after that it drives fine. So I’d say city speeds.
  6. cumminsman202

    Stall converter

    Code was P0880 tcm power input signal. Could this cause my fuel system to act up also?
  7. cumminsman202

    High rail pressure

    Tested fuel pressure it’s at 9 psi an I replaced the fpr on the main cp3 also when I unplug my fuel rail pressure gauge it will die if it unplug from the harness or if I unplug it from the gauge... kinda weird...... but I read the fuel rail pressure on my code reader an it says it bounces around...
  8. cumminsman202

    High rail pressure

    I'm gonna test the fuel pressure tomorrow an see what it is.
  9. cumminsman202

    High rail pressure

    Yea it was a real bad knock at first. Then I ran the codes an it said glow plug module so changed it an it stopped, an now it Idles fine but rail pressure is 13k. When it's in gear it drops to maybe 11k. What would make the fuel pump all of a sudden higher the pressure?
  10. cumminsman202

    High rail pressure

    Ain't got no time for periods lol
  11. cumminsman202

    High rail pressure

    Not for sure how would I test it and what's it suspost to be?
  12. cumminsman202

    High rail pressure

    And if my rail pressure gauge is unhooked it acts all dumb an stuff like the fuel pump coming on on the first click of the key an not the second an will not turn over at all I'm thinking either the fpr or rail pressure sencor
  13. cumminsman202

    High rail pressure

    Ok I just rebuilt my trans got the truck up and running when I first started it sounded like it was miss foraging real bad ran the codes glow plug module replaced that wasn't missing firing as bad now my rail pressure is at 12k to 13k at idle idk what the problem is no codes are coming up I'm...
  14. cumminsman202

    Stall converter

    Ok just rebuilt my trans an I go to drive it an it feels fine for the first 5 to 10 miles then go to take off an it feels like it's slipping never drove a truck with a stall a few buddies say it the stall makeing it feel that way but never had a trans pull good first starting out an then feel...
  15. cumminsman202

    Vgt turbo question

    I know what the out come is I just want push it to 1000 before I built it