Recent content by 2wpuller

  1. 2

    Just trying something different.

    I have swap going in a 07 Chevy took out the 8.1 put in 12v be pump with the allison. I'm using the the throttle body that I have removed the the throttle butterfly and installed a lever on the shaft. I pulls on a cable to operate the injection pump. It work great for reving the rpms up but if...
  2. 2

    Allison 1000 6 spd to 5 spd

    I have 25,000 mile on my 8.1 setup. :happy2:
  3. 2

    Allison 1000 6 spd to 5 spd

    The 8.1 setup works great EFI does adjust. Everything you need.There is a few of us have this system going. Only none gm part used is a cat. Tps Dale
  4. 2

    Lockup controler ??

    Ben can you get a hold of me I need to know if you will be able to flash some more TCM's for me.Tried to Email not got eny responses. Do I need to have the bcm flashed for the 8.1 for TH. thanks Dale
  5. 2

    Allison 6sp: resting the taps

    Just thought I'd give a update on my 6sp standolne setup for my Allison I have been trying to tune fore awhile had harsh 4>3 closed throttle downshift and inconsistent up shifts.I found a 6sp MD cal.I put a TCM in my setup WTH the MD cal.trans did the exact same shifting problems.Soo I decided...
  6. 2

    Lockup controler ??

    75 ford F350plus:D 6.0 Perkins Phasser 1000 series twins.
  7. 2

    Lockup controler ??

    Update the problem with the 4 to 3 closed throttle downshift sometimes some of the upshifts in all gears.everyone had me convinced that it was my tuning.I tried a medium Duty tcm and it did the same problems.I came to the conclusion it was the VB.tried a stock one out of another trans.night and...
  8. 2

    Allison 6sp: resting the taps

    Sorry it was to be RESETING not resting
  9. 2

    Allison 6sp: resting the taps

    Do I need to take out the EFI Tune so the tec 2 will be able to reset the taps.Not getting any codes.just shifting very hard in 2nd to 3rd and closed throttle down shift from 4th to 3rd bangs very hard doesn't change no mater what I doo with EFI,here is the tune I have in the tcm at the moment...
  10. 2

    truck towing pictures...

    That's ECT is going alittle high but I'm not familiar with what is to high for the duramax. Dale
  11. 2

    truck towing pictures...

    nice view how long is the hill. egt don't like it much does it. Dale
  12. 2

    Lockup controler ??

    Just a update shifts are getting smoother every day 5th still hits fairly hard yet.only once in a while down shifts hit a little hard.all in all I.m happy with the way this swap is going.haven't had time to find out why TH isn't working. Dale
  13. 2

    Lockup controler ??

    Don't have any problems with full fuel shifts sofore.The problem I have at the moment is the down shifts with 5th to 4th and 4th to 3rd hitting very hard.This only happens while off the throttle coasting to a stop.Going to do some more with EFI tomorrow.1,2,3,shifts are mildly firm 3 to 4 very...
  14. 2

    Lockup controler ??

    This tcm shows that it is disabled.According to the Allison software.I will find out tomorrow with efi what it reads. Dale
  15. 2

    Lockup controler ??

    The 8.1 don't refuel it is disabled in the tcm.Tomorrow night going reset shift setting lower for my motor.It doesn't turn the rpms the V8 do.my Perkins is high tq at 1600 I
See more
Top Bottom