2004LB7's latest activity
-
arguably not as handsome, but the LMM had a factory 17” wheel. I think a hair narrower and similar weight to the WCFab wheel. -
Crack a high pressure line at the rail, does it move fuel? It sure sounds like the thing is air locked. It's also possible your hose is...
-
2004LB7 replied to the thread 01 Lb7 crank no start.Normal for the primer bulb to go soft after cranking unless you have a lift pump
-
2004LB7 reacted to PureHybrid's post in the thread LB7 Leak from Valve cover at high pressure fuel line with
Like.
You can replace those seals in the valve cover. Obviously it's been apart before, hard to tell if they half assed anything but I've seen... -
2004LB7 replied to the thread LB7 Leak from Valve cover at high pressure fuel line.Shouldn't be any oil in that area. Either diesel from the high pressure line or injector body or coolant from inside the head.
-
2004LB7 replied to the thread Starting in limp mode.Welcome Limp mode will always have a code associated with it unless it's been tuned and codes turned off without dealing with the...
-
2004LB7 replied to the thread Aluminum Radiators?.Haha. Damn auto correct strikes again.
-
2004LB7 replied to the thread Aluminum Radiators?.Radiator with leaking tank at seam Pry with screwdriver to open the little tabs After screwdriver, you can carefully open them a...
-
-
2004LB7 replied to the thread Aluminum Radiators?.Mine did this on the OEM radiator. Bent the little aluminum fingers open and took the tanks and gaskets off. Cleaned everything up...
-
You would probably just have to grant them an easement for the fence. We will have to do something similar for our neighbors garage...
-
2004LB7 reacted to JoshH's post in the thread New lml engine build, no fuel rail pressure with Like.
What color are the wires to the connector on both regulators?
-
2004LB7 replied to the thread June '26 Chat -- Summertime!.I'm pretty sure the property next to me took about 5' of my property line. Based on where the official marker is in the road an the...
-
Keep in mind, you will not be able to use just an autocal to flash a file you download from the internet. As Brick pointed out, you...
-
2004LB7 replied to the thread Bad converter or something else? No DTC's.Might be a good idea to get that truck on a transmission hot flush machine to make sure there is no debris in the cooler or other areas...
