2004LB7's latest activity
-
Just watch Space X launch from Vandenburg Air base Sent from my Pixel 6 Pro using Tapatalk -
For you spelling police
-
2004LB7 replied to the thread LB7 LML Allison 1000 conversion & swap ext..That's going to be quite a tast What year LB7? Any chance of just fixing the 2015? There is quite a bit of difference between an LB7...
-
2004LB7 replied to the thread 1/8 mile discussion and time slips post here!.added
-
Gotcha. That makes sense. Amazing how many sensors we actually need to automate things. The other option is a T-stat housing...
-
Yes that's a mechanical temp gauge, the FAST system monitors it, but you can only see it if the hand held display is connected...
-
If the surface finish is smooth that's possible. The seal he has pictured, the ID doesn't appear to be designed to spin on the yoke
-
The 06/07 Chevy Express vans came with LBZ/4L85. Mechanically it's a derated LBZ from 360hp in the pickup to 250hp for the vans...on...
-
I wanted to follow up on this post. I started doubting the BCM being the problem based on what I read in service data. Before paying a...
-
2004LB7 reacted to 1FastBrick's post in the thread Bought, wrecked, rebuilding a 2009 LMM with
Haha.
You are the plumb master! -
2004LB7 replied to the thread Rear pinion seal.My 08 that I did didn't have a wear sleeve. Just right onto the pinion shaft
-
2004LB7 replied to the thread Rear pinion seal.That was my thought too. That's why I asked if he lubed it. If it stuck to the pinion shaft, it would turn the whole seal and tear out...
-
Almost looks like the seal was spinning in the bore, which doesnt happen. Does it?
-
Did you assemble it correctly? Looks like the wear sleeve is in front of the entire seal? Why was it taken apart, a leak? I did have...
-
2004LB7 replied to the thread Rear pinion seal.Did you lube the seal and pinion shaft?