"OFFICIAL" What did you do to your D-Max today?

[OregonDMAX]

Just craigslist scored a set of lml 20's and tires with 1k miles for 500 bucks.

 

[clrussell]

Just craigslist scored a set of lml 20's and tires with 1k miles for 500 bucks.

 

[jacobdewey]

Getting my new nitto 420s and 20x10 mavericks mounted and balanced tomorrow morning I cant wait to see the new look my truck will have

Post pics!

 

[wrcknkrw]

Just craigslist scored a set of lml 20's and tires with 1k miles for 500 bucks.

LML's wheels won't fit your LB7.

 

[OregonDMAX]

LML's wheels won't fit your LB7.

I can make anything fit I already have lmm mirrors and bumpers :thumb:

 

[Slowmax]

I can make anything fit I already have lmm mirrors and bumpers :thumb:

In for some pics?? ^^ :woott:

 

[wrcknkrw]

8 on 180 is roughly 15mm different than 8 on 6.5. Quite a bit to make up. Going wheel spacers or something else? I'm interested to see what you come up with. I have had the chance to buy LML wheels before but didn't want to figure out how to fit them.

 

[Hernpj01]

wheel adapters?

 

[OregonDMAX]

I'll throw up a pic after I get the nittos on

 

[Hoffie]

Installed my programmer/tuner yesterday and today I will be installing a 4" Flo Pro complete exhaust system. Fingers crossed that it goes on as easy as the video on You Tube shows it to be.

 

[elliottw]

Installed my pioneer from my lly into my Lbz along with a new pac adapter that retained the RAP and SWC and all that. Had bad experience with PAC once before but it worked flawlessly this time!

 

[superswamper003]

Installed my programmer/tuner yesterday and today I will be installing a 4" Flo Pro complete exhaust system. Fingers crossed that it goes on as easy as the video on You Tube shows it to be.

Oh... Its never as easy as the videos show it to be

 

[minerigger]

So true

 

[countrycorey]

So true

X2!


Corey

 

[Tothemax]

Removed my injectors and sent them out to become 60% overs. Ordered Ats dual cp3 kit:woott:

 

[minerigger]

Talked with Evan. Trans is going out Tuesday via UPS to go get some of his tlc. And converter off to Andrew at suncoast for some tlc

 

[stealthy_max]

A little bottom-end work today...

 

[moparkxracer]

Better put the oil pump on before you put girdle and nuts on, or you'll be taking the girdle back off.

 

[S Phinney]

To add to that it won't hurt to clearance the girdle where you pickup bolts up. On mine you could get a socket on to use a torque wrench. I did some clearancing and it works fine now.

 

[superswamper003]

Here's a couple pics with the new nittos and mavericks on m truck. I procrastinated a bit


Sent from my iPhone using Tapatalk