First pass with new setup

jedenbeck

New member
Aug 11, 2015
19
0
0
Hey guys finally got to make a pass after switching up setups. Just seeing how you guys think it did. If you think it has more in it etc. I only made one pass on tune 5. I know my 60 needs work it’s always been my weakest link. Setup is a 467.7/83/.90 60s and a 10mm pump.

Saturday at 7080 pounds I went

11.81 @115mph
7.55 @92mph
1.78 60ft
 

TheBac

Why do I keep doing this?
Staff member
Apr 19, 2008
15,303
1,596
113
Mid Michigan
Nothing wrong with 11s.
1.78 at 7000# isnt bad, either. What are you using for tires?
 

jedenbeck

New member
Aug 11, 2015
19
0
0
Nothing wrong with 11s.
1.78 at 7000# isnt bad, either. What are you using for tires?

Nitto 420s with 35psi in them lol. I drove the truck there and back. Didn’t touch anything in between besides the shocks. I wasn’t going to run tune 5 just yet but I couldn’t resist my last pass of the day.
 

slowlml

Undercover Epa agent
Feb 6, 2015
577
53
28
Strasburg Va/Wardensville Wv
Thats a good pass man. Congrats! Next time find someone there with a compressor or take one yourself and lower the psi to around mid 20s n see how that works for you. Build a little more boost and let it eat. How did it launch?
 

jedenbeck

New member
Aug 11, 2015
19
0
0
Thats a good pass man. Congrats! Next time find someone there with a compressor or take one yourself and lower the psi to around mid 20s n see how that works for you. Build a little more boost and let it eat. How did it launch?

Thanks. It felt great on the launch to me. Not my best 60ft. But it took it good and didn’t spin.
 
Feb 7, 2018
59
0
6
West Central Illinois
What boost are you trying to leave at? Not that you need to wind it to the moon but can you spool it as hard as you want without pushing through the brakes or converter???

Nice times for sure, especially at 7k lbs makes for a fun street truck :woott:
 
Last edited:

jedenbeck

New member
Aug 11, 2015
19
0
0
What boost are you trying to leave at? Not that you need to wind it to the moon but can you about to spool it as hard as you want without pushing through the brakes or converter???

Nice times for sure, especially at 7k lbs makes for a fun street truck :woott:

Typically 25-30 psi is what I normally try to shoot for. I tried leaving harder in a smaller tune and it just blew the tires off.