Can't be that far I drove from Goodlow B.C to port Angeles just so Scott could work on the truck a couple weeks ago. That was nearly 18hrs one way. :thumb:
Twins over stock with VVT + Engine Brake
- Thread starter stibuilder
- Start date
I run a Billet s475 96mm turbine with a 1.32 ar, the nice part about the 1.32 is you can run it without a gate while sacrifing very little spool if any. Keeps things simple and easy. Really like my current setup and can't wait for my new one. Yikes guess I shoulda read this whole thread before I started posting! That link was a 96mm turbine I didn't scroll down just seen the 88mm at the top. Ya looks like you should be able to pull it off, these twin kits are pretty simple and it really wouldn't take all that much to build one. I would probably build my own but Scotts stuff looks much more appealing than anything I could brew up here on the farm. Good luck with the build.
Last edited:
If you can build that, the diesel will be a walk in the park:thumb: Plenty of knowledge and folks willing to help on here.
Dude that is sick! I just bought a sti a few months ago. I am still learning those but much more knowledgeable with the duramax lol.
