LB7: coolant fill options.....

770JOHNNYW · Jan 10, 2011

so i have this.http://www.summitracing.com/parts/CTR-80-201/

And was noticing that Buck had this in diesel power a couple months ago.
http://www.summitracing.com/search/Department/Cooling-Heating/Part-Type/Radiator-Hose-Fillers/?Ns=Rank%7cAsc

Obviously it would be much easier to install just a filler neck , I already have the canton recovery tank but will just the filler neck work? Or do i have to have some sort of recovery tank for a daily driver

bullfrogjohnson · Jan 10, 2011

I thought you were using a grape soda bottle

770JOHNNYW · Jan 10, 2011

bullfrogjohnson said:
I thought you were using a grape soda bottle

maybe so! Im running out of room

770JOHNNYW · Jan 11, 2011

nobody???? I figured if i used my airlift to put the coolant in it will eliminate air but is there enough capacity there?

770JOHNNYW · Jan 15, 2011

So ended up going with the canton tank from summit...used -12 to 3/4 push lock for the feed and -8 to 5/8 push lock:thumb:

sweetdiesel · Jan 15, 2011

That's all I use

works great!

770JOHNNYW · Jan 15, 2011

sweetdiesel said:
That's all I use works great!

good to know!