Duramax Diesels Forum Truck of the Week
  #1  
Old 08-23-2018, 04:56 PM
Yngdmax92's Avatar
Yngdmax92 Yngdmax92 is offline
Hotrodder
 
Join Date: Sep 2013
Posts: 628
Default Mike L springs

Do you guys still use the springs in the valve body? I think they were called trim springs, and if you do. Where can I purchase a set of them? I am going to throw them on a trans with the transgo Jr and see how I like them. Thanks guys
__________________
2003 2500 hd cc/sb (leftovers) MPS 63.5 ihi, built trans, airdog 150, 30 overs..... Sold


New and improved! 2007 classis lbz LS ec/sb

Egr delete, pcv re-route, PIPED, airdog 4g 165,

Danville performance tunes.

Last edited by Yngdmax92; 08-24-2018 at 03:33 AM.
Reply With Quote
  #2  
Old 08-23-2018, 05:45 PM
Blackmax123 Blackmax123 is offline
Hotrodder
 
Join Date: Aug 2014
Location: central Pennsylvania
Posts: 534
Default

Call Mike L. and order direct or DHD sells them.
__________________
2013 Chevrolet 3500hd duramax loaded ltz cc/lb dually (tow pig)- built motor by me, exergy 10mm cp3 swap, danville 2.5 stg1.5 charger, 5" afe exhaust, wehrli charge piping and egr delete,wehrli stainless downpipe and danville tuned. 5" zone lift, 315/70r17. 2" hub centric front spacers 3" hubcentric rear spacers between duals.

2008 Chevrolet 3500hd duramax ltz cc/lb dually (homemade handgrenade) built motor by me, Built tranny by me, big exergy pump and s&s over it, large exergy lbz injectors, ac delete, custom Danville s400 true 2.5 charger, roll pan, 8" single stack, custom hitch and a few more pulling goodies.

2015 Vw passat tdi sel premium blacked out(old lady's ride)

2014 chevrolet cruze diesel work car.

Special thanks to Danville Performace & Limitless Diesel
Reply With Quote
  #3  
Old 08-23-2018, 05:46 PM
Blackmax123 Blackmax123 is offline
Hotrodder
 
Join Date: Aug 2014
Location: central Pennsylvania
Posts: 534
Default

Evan @ limitless diesel maybe able to help you out also.
__________________
2013 Chevrolet 3500hd duramax loaded ltz cc/lb dually (tow pig)- built motor by me, exergy 10mm cp3 swap, danville 2.5 stg1.5 charger, 5" afe exhaust, wehrli charge piping and egr delete,wehrli stainless downpipe and danville tuned. 5" zone lift, 315/70r17. 2" hub centric front spacers 3" hubcentric rear spacers between duals.

2008 Chevrolet 3500hd duramax ltz cc/lb dually (homemade handgrenade) built motor by me, Built tranny by me, big exergy pump and s&s over it, large exergy lbz injectors, ac delete, custom Danville s400 true 2.5 charger, roll pan, 8" single stack, custom hitch and a few more pulling goodies.

2015 Vw passat tdi sel premium blacked out(old lady's ride)

2014 chevrolet cruze diesel work car.

Special thanks to Danville Performace & Limitless Diesel
Reply With Quote
  #4  
Old 08-23-2018, 06:27 PM
Ne-max's Avatar
Ne-max Ne-max is offline
I like turtles
 
Join Date: Nov 2011
Location: omaha ne
Posts: 2,920

Default

Evan or Mike. All the kits evan sends us include them.
__________________
2013 ccsb Tow rig
2006 rclb 6.6
The fun stuff. Built motor, trans, triples, nitrous
Reply With Quote
  #5  
Old 08-23-2018, 07:30 PM
PureHybrid's Avatar
PureHybrid PureHybrid is offline
Isuzu Shakes IT
 
Join Date: Feb 2012
Location: Central OH
Posts: 2,208

Default

I think Evan stopped selling them separately. I ordered mine right from Mike, but this was before DHD had them listed.
__________________
04 GMC ECSB LLY - Mix breed trans/SC1056 - Profab - PPE - Kennedy twin pumps/pickup - Danville tuning: 531/944
I can't complain, but sometimes I still do
8.17@84mph 1/8mi
Jesse
Reply With Quote
  #6  
Old 08-23-2018, 08:06 PM
Ne-max's Avatar
Ne-max Ne-max is offline
I like turtles
 
Join Date: Nov 2011
Location: omaha ne
Posts: 2,920

Default

Quote:
Originally Posted by PureHybrid View Post
I think Evan stopped selling them separately. I ordered mine right from Mike, but this was before DHD had them listed.
It's hard to justify the time and shipping of such a cheap part. Especially with how busy them guys are.
__________________
2013 ccsb Tow rig
2006 rclb 6.6
The fun stuff. Built motor, trans, triples, nitrous
Reply With Quote
  #7  
Old 08-24-2018, 03:35 AM
Yngdmax92's Avatar
Yngdmax92 Yngdmax92 is offline
Hotrodder
 
Join Date: Sep 2013
Posts: 628
Default

I was always hearing about them, then it just dropped off pretty quick, but I was assuming that they started adding them into their kits. Makes more sense, thanks again fellas!
__________________
2003 2500 hd cc/sb (leftovers) MPS 63.5 ihi, built trans, airdog 150, 30 overs..... Sold


New and improved! 2007 classis lbz LS ec/sb

Egr delete, pcv re-route, PIPED, airdog 4g 165,

Danville performance tunes.
Reply With Quote
  #8  
Old 08-24-2018, 04:11 AM
SoCalMike's Avatar
SoCalMike SoCalMike is offline
Hotrodder
 
Join Date: Dec 2010
Location: SoCal
Posts: 568
Default

It made a noticeable difference when I got mine installed. Way better shifting compared to the trans go springs. I called Mike and asked how much to install his new springs and he told me it's better just to come down to the shop. I went down to the shop and he got my truck on the rack installed the trim and shift springs and told me to go take a drive. I couldn't believe the difference it made in shifting. Mike gave me the springs and installed them for free. Thanks again Mike!
__________________
LBZ
Reply With Quote
  #9  
Old 08-24-2018, 06:48 AM
Mike L.'s Avatar
Mike L. Mike L. is online now
Got Sheep?
 
Join Date: Aug 2006
Location: Disneyland, CA
Posts: 14,784
Default

They work. Adding the 3 white shift valve springs makes it even better.
__________________
Inglewood Transmission Service
Shop 714 870 7300
Cell 310 918 9678

Tuned by Idaho Rob.
Reply With Quote
  #10  
Old 08-24-2018, 08:35 AM
Yngdmax92's Avatar
Yngdmax92 Yngdmax92 is offline
Hotrodder
 
Join Date: Sep 2013
Posts: 628
Default

Ordered them up as well mike!!! Thanks again!
__________________
2003 2500 hd cc/sb (leftovers) MPS 63.5 ihi, built trans, airdog 150, 30 overs..... Sold


New and improved! 2007 classis lbz LS ec/sb

Egr delete, pcv re-route, PIPED, airdog 4g 165,

Danville performance tunes.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 04:01 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
vB.Sponsors