Duramax Diesels Forum Truck of the Week
  #1  
Old 11-07-2017, 05:27 PM
DetailsUnlimited's Avatar
DetailsUnlimited DetailsUnlimited is offline
Hotrodder
 
Join Date: Oct 2009
Location: Benton, Ar
Posts: 1,259
Default Finally getting my triple kit and rebuilding the motor

After blowing the race motor(hole in a piston) and selling the twins at the end of 2015, i've decided to rebuild and do triples.
Triples will have 2-s369's and 1-s468. Going back with 100 overs, dual fuelers, socal 6460 cam and fingers 15.5:1 pistons with .075 reliefs. Actually want to sell the pistons and go forged just to be safe. I do drive the truck alot and tow with it so i'm concerned about the rings. Have a few pics of the triple kit being fabbed up but cant seem to upload them.
__________________
Gaylon(Tark)Tarkington
Trucks Name: Consistantly Inconsistant!

06 LBZ CCSB
Built motor

Team Hole in the Piston "RIP" 10/21/11
2011 NHRDA Ennis, Tx Sportsmen Champion
2011 NHRDA Sportsmen World Champion
2014 TS Performance 12.0 Index
New ride - 07 3500 Duramax Van
Reply With Quote
  #2  
Old 11-07-2017, 05:30 PM
DetailsUnlimited's Avatar
DetailsUnlimited DetailsUnlimited is offline
Hotrodder
 
Join Date: Oct 2009
Location: Benton, Ar
Posts: 1,259
Default

How can i upload pics with a samsung8 plus?
__________________
Gaylon(Tark)Tarkington
Trucks Name: Consistantly Inconsistant!

06 LBZ CCSB
Built motor

Team Hole in the Piston "RIP" 10/21/11
2011 NHRDA Ennis, Tx Sportsmen Champion
2011 NHRDA Sportsmen World Champion
2014 TS Performance 12.0 Index
New ride - 07 3500 Duramax Van
Reply With Quote
  #3  
Old 11-07-2017, 05:48 PM
TheBac's Avatar
TheBac TheBac is offline
Why do I keep doing this?


 
Join Date: Apr 2008
Location: Mid Michigan
Posts: 11,875

Default

Damn Tark, talk about "go big or go home"...

This going into the LBZ?
__________________
Tom
"BBT" -- 2003 GMC CC/SB 4x4 12.14@111.15
"The Cruzer" -- 2014 Chevy Cruze Diesel -- the fun little DD
"Kleshay" -- 2000 C5 Corvette -- the toy
"The Bigger Boat" -- 2011 Workhorse P700 - 6.0LS/Allison - what I drive at work


Two wrongs dont make a right, but three rights do make a left.

Reality is a matter of perspective.

This forum isn't for the weak of heart.....or wallet.

"Lets build a race car they said. Itll be fun they said. I don't know who "they" are.........but they need a good punch in the face!" -- mufflerguy (yb)
Reply With Quote
  #4  
Old 11-07-2017, 05:48 PM
prostreeter600's Avatar
prostreeter600 prostreeter600 is offline
Street rodder
 
Join Date: Jul 2010
Location: Dallas Tx
Posts: 710

Default Pics

Posting these pics for my friend Gaylon
__________________
06! GMC Sierra RC Full built motor, carillos, 14/1 Arias W/total seal rings, 9100 AF, SCalTit retainers,SCalsprings,ported heads, SCal pushrods, ARP 625 head studs, O-ringed block, keyed oil pump ,Billet Aluminum Lifters, Harland Sharp Aluminum roller rockers, studded rocker shafts, studded & girdled mains, socal balancer, socal flywheel, PPE Dual Fuelers with twin Fleece 10 mm CP3s , FASS Titanium 260 , 3" bridge, , TrRIPLES----2---S369SXEs .88ARs over a Hybrid GTX 4202R--72mm/87mm 1.0 AR ,coilovers at 4 corners, 36" ladder bars, BD cooler, Exergys w/185% MS 8 hole nozzles ,FF Dynamics fans, PPE mans & ups , MA mounts & TC Brace ,NOS, Full Billet Trans, Suncoast 10531-3D , 3.42 Gears, BT lockup box. 16 x 12s & 16 x 10 Real Wheels with M & H 12/16s and 13/16s. TUNED by MARK@DANVILLE. Engine by Jason Walker San Marcus Tx Best 60'---1.44. Best 1/8---6.39@105.92. Best 1/4---9.978@136.39
Reply With Quote
  #5  
Old 11-07-2017, 05:49 PM
DetailsUnlimited's Avatar
DetailsUnlimited DetailsUnlimited is offline
Hotrodder
 
Join Date: Oct 2009
Location: Benton, Ar
Posts: 1,259
Default

Yes. The truck was a yard gnome for awhile.
__________________
Gaylon(Tark)Tarkington
Trucks Name: Consistantly Inconsistant!

06 LBZ CCSB
Built motor

Team Hole in the Piston "RIP" 10/21/11
2011 NHRDA Ennis, Tx Sportsmen Champion
2011 NHRDA Sportsmen World Champion
2014 TS Performance 12.0 Index
New ride - 07 3500 Duramax Van
Reply With Quote
  #6  
Old 11-07-2017, 05:49 PM
DetailsUnlimited's Avatar
DetailsUnlimited DetailsUnlimited is offline
Hotrodder
 
Join Date: Oct 2009
Location: Benton, Ar
Posts: 1,259
Default

Thx Elvis!! The pics have been loaded
__________________
Gaylon(Tark)Tarkington
Trucks Name: Consistantly Inconsistant!

06 LBZ CCSB
Built motor

Team Hole in the Piston "RIP" 10/21/11
2011 NHRDA Ennis, Tx Sportsmen Champion
2011 NHRDA Sportsmen World Champion
2014 TS Performance 12.0 Index
New ride - 07 3500 Duramax Van
Reply With Quote
  #7  
Old 11-07-2017, 05:51 PM
DetailsUnlimited's Avatar
DetailsUnlimited DetailsUnlimited is offline
Hotrodder
 
Join Date: Oct 2009
Location: Benton, Ar
Posts: 1,259
Default

Joe at HSP is making my kit for me.
__________________
Gaylon(Tark)Tarkington
Trucks Name: Consistantly Inconsistant!

06 LBZ CCSB
Built motor

Team Hole in the Piston "RIP" 10/21/11
2011 NHRDA Ennis, Tx Sportsmen Champion
2011 NHRDA Sportsmen World Champion
2014 TS Performance 12.0 Index
New ride - 07 3500 Duramax Van
Reply With Quote
  #8  
Old 11-07-2017, 07:29 PM
1TRIKHD's Avatar
1TRIKHD 1TRIKHD is online now
Country boy Limo.
 
Join Date: Sep 2015
Location: P.N.W
Posts: 1,021
Default

Looks killer
__________________
2006 CCLB LT3 Victory Red

SDP Built Trans w/ Goerend G billet stator
S472sx-e .87/1.0ar w/ SDP Piping
Wagler street intake
Custom 80" Trac Bars by MBS Diesel
ADII 165
Full Kryptonite Front end
PPE manifolds up pipes
Special Thanks to:Scott@SDP
Tuned by:Blake@UDT
Best time to date: 12.08 @ 112.58 1.76 60ft
Reply With Quote
  #9  
Old 11-07-2017, 07:30 PM
M.A.M.'s Avatar
M.A.M. M.A.M. is offline
Hotrodder
 
Join Date: Jan 2016
Location: Holmesville, OH
Posts: 229
Default

Jealous!


Sent from my iPhone using Tapatalk
Reply With Quote
  #10  
Old 11-07-2017, 08:27 PM
DetailsUnlimited's Avatar
DetailsUnlimited DetailsUnlimited is offline
Hotrodder
 
Join Date: Oct 2009
Location: Benton, Ar
Posts: 1,259
Default

Thx! Machine shop will be done friday so i can go pick up my parts and build the motor. Pretty cool they made their own TQ Plate. And again if i could load pics id post them up.

On a side note my 8 and 10 year old sons helped me dissassemble the motor and will help me build it. I guess my 14 year old had better things to do... and yes it was awesome having them help!
__________________
Gaylon(Tark)Tarkington
Trucks Name: Consistantly Inconsistant!

06 LBZ CCSB
Built motor

Team Hole in the Piston "RIP" 10/21/11
2011 NHRDA Ennis, Tx Sportsmen Champion
2011 NHRDA Sportsmen World Champion
2014 TS Performance 12.0 Index
New ride - 07 3500 Duramax Van

Last edited by DetailsUnlimited; 11-07-2017 at 08:36 PM.
Reply With Quote
  #11  
Old 11-07-2017, 08:33 PM
prostreeter600's Avatar
prostreeter600 prostreeter600 is offline
Street rodder
 
Join Date: Jul 2010
Location: Dallas Tx
Posts: 710

Default

I got ur back , just hit me up I’ll post em for ya
__________________
06! GMC Sierra RC Full built motor, carillos, 14/1 Arias W/total seal rings, 9100 AF, SCalTit retainers,SCalsprings,ported heads, SCal pushrods, ARP 625 head studs, O-ringed block, keyed oil pump ,Billet Aluminum Lifters, Harland Sharp Aluminum roller rockers, studded rocker shafts, studded & girdled mains, socal balancer, socal flywheel, PPE Dual Fuelers with twin Fleece 10 mm CP3s , FASS Titanium 260 , 3" bridge, , TrRIPLES----2---S369SXEs .88ARs over a Hybrid GTX 4202R--72mm/87mm 1.0 AR ,coilovers at 4 corners, 36" ladder bars, BD cooler, Exergys w/185% MS 8 hole nozzles ,FF Dynamics fans, PPE mans & ups , MA mounts & TC Brace ,NOS, Full Billet Trans, Suncoast 10531-3D , 3.42 Gears, BT lockup box. 16 x 12s & 16 x 10 Real Wheels with M & H 12/16s and 13/16s. TUNED by MARK@DANVILLE. Engine by Jason Walker San Marcus Tx Best 60'---1.44. Best 1/8---6.39@105.92. Best 1/4---9.978@136.39
Reply With Quote
  #12  
Old 11-07-2017, 09:18 PM
rcr1978's Avatar
rcr1978 rcr1978 is offline
Hotrodder
 
Join Date: Apr 2007
Location: Spring Creek, NV
Posts: 579
Default

Anyone had any luck with the Diamond pistons yet (forged/steel insert)last I heard there was a few going into new builds but no long term or serious abuse yet? May check those out if you ditch your fingers ones, I was thinking about them until I saw the price . I shouldn't have even worried about it since everything else is so spendy I just wanted something to be able drive/tow with and not a dedicated race motor. Went Mahle race cast instead but probably was a mistake, is that what you had on the race motor?
__________________
04 LB7 ECSB Built motor, Wagler billet narrowed Rods, Callies billet narrowed journal crank, Mahle Race Cast pistons, Randy's Girdle, Wagler/Callies Stage 1 alterfire cam, Exergy 100% SAC's, dual CP3's, Randy's race ported heads, Profab cast flow/up pipes, and S475 over stock twins for now more later.
2010 LMM CCLB-Tuning/Exhaust
2015 LML Cab and chassis- Tuning/Exhaust
Reply With Quote
  #13  
Old 11-07-2017, 09:54 PM
DetailsUnlimited's Avatar
DetailsUnlimited DetailsUnlimited is offline
Hotrodder
 
Join Date: Oct 2009
Location: Benton, Ar
Posts: 1,259
Default

Quote:
Originally Posted by rcr1978 View Post
Anyone had any luck with the Diamond pistons yet (forged/steel insert)last I heard there was a few going into new builds but no long term or serious abuse yet? May check those out if you ditch your fingers ones, I was thinking about them until I saw the price . I shouldn't have even worried about it since everything else is so spendy I just wanted something to be able drive/tow with and not a dedicated race motor. Went Mahle race cast instead but probably was a mistake, is that what you had on the race motor?
Yep, thats what i had. A cracked turned into a hole right at the wrist pin.
__________________
Gaylon(Tark)Tarkington
Trucks Name: Consistantly Inconsistant!

06 LBZ CCSB
Built motor

Team Hole in the Piston "RIP" 10/21/11
2011 NHRDA Ennis, Tx Sportsmen Champion
2011 NHRDA Sportsmen World Champion
2014 TS Performance 12.0 Index
New ride - 07 3500 Duramax Van
Reply With Quote
  #14  
Old 11-07-2017, 10:01 PM
rcr1978's Avatar
rcr1978 rcr1978 is offline
Hotrodder
 
Join Date: Apr 2007
Location: Spring Creek, NV
Posts: 579
Default

Quote:
Originally Posted by DetailsUnlimited View Post
Yep, thats what i had. A cracked turned into a hole right at the wrist pin.
What kind of life did you get out of them and roughly what hp?

Sent from my SAMSUNG-SM-G891A using Tapatalk
__________________
04 LB7 ECSB Built motor, Wagler billet narrowed Rods, Callies billet narrowed journal crank, Mahle Race Cast pistons, Randy's Girdle, Wagler/Callies Stage 1 alterfire cam, Exergy 100% SAC's, dual CP3's, Randy's race ported heads, Profab cast flow/up pipes, and S475 over stock twins for now more later.
2010 LMM CCLB-Tuning/Exhaust
2015 LML Cab and chassis- Tuning/Exhaust
Reply With Quote
  #15  
Old 11-07-2017, 10:08 PM
1TRIKHD's Avatar
1TRIKHD 1TRIKHD is online now
Country boy Limo.
 
Join Date: Sep 2015
Location: P.N.W
Posts: 1,021
Default

Quote:
Originally Posted by DetailsUnlimited View Post
Thx! Machine shop will be done friday so i can go pick up my parts and build the motor. Pretty cool they made their own TQ Plate. And again if i could load pics id post them up.

On a side note my 8 and 10 year old sons helped me dissassemble the motor and will help me build it. I guess my 14 year old had better things to do... and yes it was awesome having them help!
I love having my 5 and 7 yr old boys help me when I work on my truck.
__________________
2006 CCLB LT3 Victory Red

SDP Built Trans w/ Goerend G billet stator
S472sx-e .87/1.0ar w/ SDP Piping
Wagler street intake
Custom 80" Trac Bars by MBS Diesel
ADII 165
Full Kryptonite Front end
PPE manifolds up pipes
Special Thanks to:Scott@SDP
Tuned by:Blake@UDT
Best time to date: 12.08 @ 112.58 1.76 60ft
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 04:05 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
vB.Sponsors