|
|
|
#1
08-22-2018, 08:59 AM
|
||||
|
||||
Cracked stock manifold
Hey guys, was at the races last weekend and noticed my passenger side stock manifold had cracked around my drilled and tapped egt port. Honestly I’m surprised it lasted as long as it did, I’ve got the BD drivers side. Still managed a new personal best of 11.0 at 127mph. I’m running a set of up pipes from sdp currently, wanting to go to an aftermarket setup now that I’m pushing the setup. Is there anyone that offers a set of manifolds that bolt up to the factory up pipe location?
__________________
Chad 2007 lmm: kryptonite front end, full billet trans by Sdp, SoCal engine ovals and Carrillos, 12mm exergy stroker, 100 over exergy injectors, sdp billet 68mm over billet 480, awesome tuning from Aaron at All in trucks. Best 1/4 to date: 11.06 at 127 in the chase for 10’s. 
|
|
#2
08-22-2018, 09:55 AM
|
||||
|
||||
|
Profab. Rick is a vendor on here.
__________________
Bryan 11 CCSB 4x4 Full delete, EFI by Ridgerunner, 5" FloPro, Profab manifolds and up pipes, Wehrli cp3 conversion, 3" downpipe, S&B intake, AD165 4G, DHD tie rod sleeves, 2" rear drop shackles, Rancho RS9000XL
|
|
#3
08-22-2018, 11:19 AM
|
||||
|
||||
|
Don’t think he has an option for stock up pipe position
__________________
Chad 2007 lmm: kryptonite front end, full billet trans by Sdp, SoCal engine ovals and Carrillos, 12mm exergy stroker, 100 over exergy injectors, sdp billet 68mm over billet 480, awesome tuning from Aaron at All in trucks. Best 1/4 to date: 11.06 at 127 in the chase for 10’s.
|
|
#4
08-22-2018, 11:49 AM
|
||||
|
||||
|
Just get a full set they will fit a million times better than stock, the only vendor you'll find that offer aftermarket manifolds that bolt to factory positioned uppipes are going to be less than desireable.
save yourself the headache and go with all new setup from profab, I'm currently regretting my past mistakes of buying just uppupes and then trying to find manifolds for them. I bit the bullet and bought a whole setup from Rick.
__________________
Sean 02 CCSB Moonshine tunes, Mike L trans  Mike L secret squirrel converter Exergy Sportsman, 4/6 drop, LML 20's/420's supporting mods
|
|
#5
08-22-2018, 04:00 PM
|
||||
|
||||
|
Wish I had have just went with the full setup from the start, I hadn’t realized that the aftermarket stuff was different. If it wasn’t for the exchange rate I would have ordered it from Rick already, these up pipes are brand new. Guess it’s a hillbilly port and polish on a stocker and let her eat. Probably do it with the next setup, Thanks for the input guys!
__________________
Chad 2007 lmm: kryptonite front end, full billet trans by Sdp, SoCal engine ovals and Carrillos, 12mm exergy stroker, 100 over exergy injectors, sdp billet 68mm over billet 480, awesome tuning from Aaron at All in trucks. Best 1/4 to date: 11.06 at 127 in the chase for 10’s.
|
|
#6
08-22-2018, 04:39 PM
|
||||
|
||||
|
You wanna buy some ported and polished stock manifolds
__________________
Sean 02 CCSB Moonshine tunes, Mike L trans Mike L secret squirrel converter Exergy Sportsman, 4/6 drop, LML 20's/420's supporting mods
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
