Duramax Diesels Forum Truck of the Week
  #1  
Old 06-05-2018, 06:32 PM
hhh217 hhh217 is offline
FNG
 
Join Date: Oct 2010
Location: PA
Posts: 15
Default 07 Classic 41k miles, need help with selling price

I am on the fence about selling my truck to buy new tractor and not sure what it is worth. Can I get a few opinions on what I should ask for it? I bought it a few months after it left the dealer lot with the first owner. It is a 2007 chevy classic 2500 LT 4x4 extended cab short bed Red in color. Over the years I have built the engine, trans and installed a detroit tru track locker in the rear. The engine build consists of factory block bored .020 over, mahle delipped, ceramic coated, teflon coated, vavle reliefs with 15-8-1 ratio. Carillo rods. So-cal 3388 cam and behive valve springs. head and main studs. Bag of parts on cp3. Fleece 71.5 cheetah turbo with hx40 output flange and 3.5" down pipe. Lb7 r/s up pipe. BD r/s manifold. fluid damper balancer. Tuned with dsp5 by fleece. welded egr block plated in stock upper intake manifold. Snow stage 3 water and meth with digital controller with it pretty much there for pyro and boost, barely used. Engine bay looks completely stock and unmolested. Trans is built with a stage 5 PPE kit. Air dog 150. Still has original gm aluminum wheels with 265/75/16 mud tires in good shape and the bumper and fender well has never been modified for bigger tires. Has a line ex bed liner. Smoked LED tail lighs. CB with dual antennas. Charcoal interior with cloth seats. Inside and out this is a pretty clean truck. I have spend alot of time building this truck and always tried to make everything look good and not hacked like most mods I have seen.

The truck has just over 41,000 miles on it. The engine was build at 30,000 and trans around 20,000. It was my daily driver for about 2 years and then I stopped driving it in the winter and these days it just sits in my garage. I will work on getting some pics up. I am sure there are more things that I have missed but if anyone can give me a idea on what it is worth I would apreciate it.
Reply With Quote
  #2  
Old 06-05-2018, 08:18 PM
Burn Down's Avatar
Burn Down Burn Down is offline
Hotrodder
 
Join Date: Sep 2008
Location: Boise Idaho
Posts: 6,399

Default

Built trucks are really hard to price... You just need to look at what you got in it and figure out a price you can live with for selling it.

It sounds very nice and clean, I would price it high and hope someone looking for a very specific truck build comes along
__________________
04.5’ CCSB ole blue, built trans, mpi twins
03’ Reg Cab ZF 6
05’ CCSB ole crappy, built eng, built trans, mpi twins
Reply With Quote
  #3  
Old 06-06-2018, 04:40 AM
NC-smokinlmm's Avatar
NC-smokinlmm NC-smokinlmm is offline
<<<Future tuna killer
 
Join Date: May 2011
Location: At Da Beach
Posts: 3,877
Default

Total up performance parts and calculate what 40% total investment is and add it to the average price of a similar stock truck in your area...
__________________
2010 GMC 1500 SCSB Denali Clone < lifted 22's/33's, Kooks, Magnaflow, 5.3, 6l80, TVS1900, lots of boost, Mayhem tuned, etc...

2015 Corvette Stingray Z 51 < Stock...

2016 LML CCSB Denali < Lifted 22's/35's, Fox 2.0 < I officially need help.
Reply With Quote
  #4  
Old 06-06-2018, 07:17 AM
Chevy1925's Avatar
Chevy1925 Chevy1925 is online now
don't know sh!t about IFS

 
Join Date: Oct 2009
Location: Phoenix Az
Posts: 14,416

Default

Quote:
Originally Posted by hhh217 View Post
I am on the fence about selling my truck to buy new tractor and not sure what it is worth. Can I get a few opinions on what I should ask for it? I bought it a few months after it left the dealer lot with the first owner. It is a 2007 chevy classic 2500 LT 4x4 extended cab short bed Red in color. Over the years I have built the engine, trans and installed a detroit tru track locker in the rear. The engine build consists of factory block bored .020 over, mahle delipped, ceramic coated, teflon coated, vavle reliefs with 15-8-1 ratio. Carillo rods. So-cal 3388 cam and behive valve springs. head and main studs. Bag of parts on cp3. Fleece 71.5 cheetah turbo with hx40 output flange and 3.5" down pipe. Lb7 r/s up pipe. BD r/s manifold. fluid damper balancer. Tuned with dsp5 by fleece. welded egr block plated in stock upper intake manifold. Snow stage 3 water and meth with digital controller with it pretty much there for pyro and boost, barely used. Engine bay looks completely stock and unmolested. Trans is built with a stage 5 PPE kit. Air dog 150. Still has original gm aluminum wheels with 265/75/16 mud tires in good shape and the bumper and fender well has never been modified for bigger tires. Has a line ex bed liner. Smoked LED tail lighs. CB with dual antennas. Charcoal interior with cloth seats. Inside and out this is a pretty clean truck. I have spend alot of time building this truck and always tried to make everything look good and not hacked like most mods I have seen.

The truck has just over 41,000 miles on it. The engine was build at 30,000 and trans around 20,000. It was my daily driver for about 2 years and then I stopped driving it in the winter and these days it just sits in my garage. I will work on getting some pics up. I am sure there are more things that I have missed but if anyone can give me a idea on what it is worth I would apreciate it.
so what are your intentions on being here? get a price on said truck, post it for sale and buzz off the moment its gone? sure as hell seems like it newb...
__________________
Quote:
Originally Posted by JoshH View Post
Mike L is my role model. I want to be like him when I grow up.
James

02 LL7 2500HD CC/LB dmax/alli "The Limo"

BIG THANKS TO: Mike L, Steve, Trent, Guy, Dan, Ruben, Josh H, Scott, Brian and everyone else who has put a hand in to help me.

best time to date: 12.39

motor died/bent rods = 3/11/11
back from the dead 7:04pm 4/9/2012

Limo is back in the garage, now driving a built chevy tracker
Tailgate Crew Member #4
Reply With Quote
  #5  
Old 06-06-2018, 08:33 AM
MaxSmoke's Avatar
MaxSmoke MaxSmoke is offline
FNG for life
 
Join Date: Jan 2012
Location: Brighton Co
Posts: 85

Default

So is the truck leather interior or cloth? I know you said cloth seats but you also say the truck is an LT. LS would be cloth
__________________
04 LB7, PPE standard, Flo-pro d/p, 2" lowering shackles. Fass 150, Wetzel wheel, Air bags
Reply With Quote
  #6  
Old 06-06-2018, 08:49 AM
zakkb787's Avatar
zakkb787 zakkb787 is online now
<that’s not me...
 
Join Date: Sep 2014
Location: Granite Falls NC
Posts: 1,445

Default

Quote:
Originally Posted by MaxSmoke View Post
So is the truck leather interior or cloth? I know you said cloth seats but you also say the truck is an LT. LS would be cloth
LT or LS doesn’t really matter. I had an 06 LT with manual cloth seats and a jump seat
__________________
2006 LLY CC/SB LT3 mostly stock

Other toys:
1982 K10 6.2 Detroit diesel/sm465/np205 with 4 inch lift and 35s. And it’s currently broke
2011 Yamaha YFZ450X
2003 Yamaha YZ250
2003 Kawasaki Z1000
Reply With Quote
  #7  
Old 06-06-2018, 08:50 AM
WVRigrat05's Avatar
WVRigrat05 WVRigrat05 is offline
Wound for sound
 
Join Date: Jan 2011
Location: French Creek, West Virginia
Posts: 3,026

Default

Quote:
Originally Posted by MaxSmoke View Post
So is the truck leather interior or cloth? I know you said cloth seats but you also say the truck is an LT. LS would be cloth
In 06 they started the LT1,2 and 3 package, LT 1 is basically an LS with a six disk changer or onstar or some small add on to make it an LT
__________________
Reger
05' Black Chevy CC/SB LT- Blackout Performance built motor/trans/tuning- Gone

The Blessed Hellride- 08' White GMC Sierra SLT CC/SB,
100k miles. Piston eater.

Wife's ride- 2016 Pearl white Legacy limited 3.6R

Rig ride/new DD-02' Black Eddie Bauer explorer 4.6, -180k, still sporting original trans, outlasted two Duramaxs.
Reply With Quote
  #8  
Old 06-06-2018, 09:00 AM
cdbright's Avatar
cdbright cdbright is offline
JUST RENT IT
 
Join Date: Dec 2008
Location: Salt Lake City, UT
Posts: 759

Default

yea i got a LT once that had leather added by the dealer but the rest was pretty much farm truck
__________________
2015 GMC Denali 4X4 CC/SB 2500 LML
20" MOTOs W NITTO MTs
Delete/EFI/5" straight soon to come




2008 GMC 2500 (SOLD)
EFI,all deleted,rode hard,stayed together

2009 Chev 2500 (traded) EFI, all deleted, rode just as hard as her ^^^, stayed together
Reply With Quote
  #9  
Old 06-06-2018, 09:27 AM
hhh217 hhh217 is offline
FNG
 
Join Date: Oct 2010
Location: PA
Posts: 15
Default

Quote:
Originally Posted by Chevy1925 View Post
so what are your intentions on being here? get a price on said truck, post it for sale and buzz off the moment its gone? sure as hell seems like it newb...
No I have been a member for years but have been really busy starting my new business with a new email and can remember me old password for this site and can't get into my old email that is associated with this site. I started a new one just to get back on here. I don't post a lot but read and enjoy all the info everyone has to share here.
Reply With Quote
  #10  
Old 06-06-2018, 09:29 AM
hhh217 hhh217 is offline
FNG
 
Join Date: Oct 2010
Location: PA
Posts: 15
Default

Quote:
Originally Posted by MaxSmoke View Post
So is the truck leather interior or cloth? I know you said cloth seats but you also say the truck is an LT. LS would be cloth
Yeah it is an LT with cloth seats. I debadged the truck but the LT is still on the back of the cab
Reply With Quote
  #11  
Old 06-06-2018, 09:47 AM
Chevy1925's Avatar
Chevy1925 Chevy1925 is online now
don't know sh!t about IFS

 
Join Date: Oct 2009
Location: Phoenix Az
Posts: 14,416

Default

Quote:
Originally Posted by hhh217 View Post
No I have been a member for years but have been really busy starting my new business with a new email and can remember me old password for this site and can't get into my old email that is associated with this site. I started a new one just to get back on here. I don't post a lot but read and enjoy all the info everyone has to share here.
thats good to hear
__________________
Quote:
Originally Posted by JoshH View Post
Mike L is my role model. I want to be like him when I grow up.
James

02 LL7 2500HD CC/LB dmax/alli "The Limo"

BIG THANKS TO: Mike L, Steve, Trent, Guy, Dan, Ruben, Josh H, Scott, Brian and everyone else who has put a hand in to help me.

best time to date: 12.39

motor died/bent rods = 3/11/11
back from the dead 7:04pm 4/9/2012

Limo is back in the garage, now driving a built chevy tracker
Tailgate Crew Member #4
Reply With Quote
  #12  
Old 06-06-2018, 01:50 PM
Burn Down's Avatar
Burn Down Burn Down is offline
Hotrodder
 
Join Date: Sep 2008
Location: Boise Idaho
Posts: 6,399

Default

Quote:
Originally Posted by Chevy1925 View Post
thats good to hear
How’s that boot taste a-hole
__________________
04.5’ CCSB ole blue, built trans, mpi twins
03’ Reg Cab ZF 6
05’ CCSB ole crappy, built eng, built trans, mpi twins
Reply With Quote
  #13  
Old 06-06-2018, 01:52 PM
Chevy1925's Avatar
Chevy1925 Chevy1925 is online now
don't know sh!t about IFS

 
Join Date: Oct 2009
Location: Phoenix Az
Posts: 14,416

Default

Quote:
Originally Posted by Burn Down View Post
How’s that boot taste a-hole
you shut your whorish mouth or ill give you some boot too .
__________________
Quote:
Originally Posted by JoshH View Post
Mike L is my role model. I want to be like him when I grow up.
James

02 LL7 2500HD CC/LB dmax/alli "The Limo"

BIG THANKS TO: Mike L, Steve, Trent, Guy, Dan, Ruben, Josh H, Scott, Brian and everyone else who has put a hand in to help me.

best time to date: 12.39

motor died/bent rods = 3/11/11
back from the dead 7:04pm 4/9/2012

Limo is back in the garage, now driving a built chevy tracker
Tailgate Crew Member #4
Reply With Quote
  #14  
Old 06-06-2018, 08:32 PM
LBZ's Avatar
LBZ LBZ is offline
Super Moderator
 
Join Date: Jul 2007
Location: Ontario
Posts: 9,942

Default

Quote:
Originally Posted by burn down View Post
how’s that boot taste a-hole


lmfao
Reply With Quote
  #15  
Old 06-07-2018, 04:25 AM
NC-smokinlmm's Avatar
NC-smokinlmm NC-smokinlmm is offline
<<<Future tuna killer
 
Join Date: May 2011
Location: At Da Beach
Posts: 3,877
Default

Quote:
Originally Posted by Burn Down View Post
How’s that boot taste a-hole
__________________
2010 GMC 1500 SCSB Denali Clone < lifted 22's/33's, Kooks, Magnaflow, 5.3, 6l80, TVS1900, lots of boost, Mayhem tuned, etc...

2015 Corvette Stingray Z 51 < Stock...

2016 LML CCSB Denali < Lifted 22's/35's, Fox 2.0 < I officially need help.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 09:16 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
vB.Sponsors