Search results
-
Venturi catch can setup
Found this on Mitchell. Their wording makes it a little hard to follow, but it sounds pretty similar to the LML PCV system. An oil/air separator (2) is located on the left valve cover. Oil entrained gases from the crankcase enter the separator through a passage in the left valve cover. The... -
Lb7 5 speed
I got a full 6-speed kit from Evan at Limitless just shy of 2 years ago. If my notes are correct, C1, C3, and C4 were alto discs, and C2 was Raybestos. Haven't really kept myself up to date on the latest and greatest since then though, so he might be doing things a bit differently. Give Evan a...- tjs82
- Post #7
- Forum: Mike L's Trans Talk
-
Injector return lines
Just did a quick search. Looks like you can still get that hose from certain distributors, but gates doesn't list 5/32" (0.156") ID as a size for that particular hose on their website anymore. I have a feeling gates may have discontinued it. Anyway, I found another type of hose on their site... -
Lbz coolant line size
Not 100% sure if they're the same size, but the hose is 1/2" ID on an LMM. It's for the coolant return from the turbo. It slides over a flared barb on each end, and it just has spring clamps from the factory. So if you're going the braided hose route, I'd get some good hose clamps. That hose... -
Wiring Harness mounted on fender insert
Usually I wrangle the liner into the fender, and leave it sort of hanging loose. Then attach the connectors onto the liner first before bolting anything in. My liners have been in and out quite a few times though, so the holes for the connectors are pretty clapped out. You could always tie... -
Coolant pipe coating
That's likely the route I'll be taking. I figured if there was an alternative to the OEM part, I'd be able to kill two birds with one pipe. Thanks James -
Coolant pipe coating
Thanks for the quick replies guys! I was planning on either stripping the coating or worst case, replacing the pipes. I just don't want that stuff floating around my cooling system (especially the radiator). Considering getting a filter setup too, as a decent amount of coating is already... -
Coolant pipe coating
Sorry for taking so long to follow up on this. I've had some other issues to address, so this got put on the back burner. Anyway, I'm not completely ruling out scale from hard water, but it doesn't seem like scale to me, and here's why. Everywhere else in the cooling system is clean of this... -
Coolant pipe coating
The picture below is the inside of my upper radiator pipe. The pipe from the pump to the oil cooler looks pretty similar, and the bypass pipe has almost no coating left in it. Has anyone on here ever encountered this before? I've always ran dex-cool, and the thing has never overheated as long... -
Coilover kit for 2001-2010 trucks
This kit definitely drops the front diff. It's almost identical to their old torsion drop style kit that currently resides on my truck. At least until I get the time and ambition to make some changes. Unfortunately, their design involves cutting out the original crossmember that the front...- tjs82
- Post #20
- Forum: Chassis, Suspension & Brakes
-
Coilover kit for 2001-2010 trucks
Flashback to several months ago. I find myself stumbling around SEMA with a Bacardi 151-induced hangover. After several minutes of standing in front of the BDS booth with the look of a lobotomized toddler on my face, I realized what was in front of me. BDS decided that us 2001-2010 3/4 ton...- tjs82
- Thread
- Replies: 19
- Forum: Chassis, Suspension & Brakes
-
2007 Gmc Sierra 2500hd
tjs82 submitted a new Showcase Item: 2007 Gmc Sierra 2500hd Read more about this showcase item here... -
