Search results

Search the forum Search Articles
  1. M

    Allison 6sp: Cooler/heater

    Hi guys anyone know who sell radiator parts ? Id like to change only transmission cooler part instead of buying new rad each time i do a build Thank you Envoyé de mon iPhone en utilisant Tapatalk
  2. M

    lml allison build pressure question...Ratiotek or TCM tuning ??

    Hi Guys like title said on a built trans with 700whp + do im better with pump stock and TCM tuning or Ratiotek kit with factory pressure in TCM ?? suncoast clutches and 3disk converter of course... thank you
  3. M

    Lock up problem

    Hi everybody i need help to find my problem i run a built trans and when the lock up is applied in 4-5-6 gear at 40-75% throttle i have a big vibration so i hook up the tech2 and when the vibration is there the TCC slip go to 100rpm as soon as it slip....fresh trans built and brand new Goerend...
  4. M

    A50 question

    Can i take a 2011 A50 and put it on a 2009 if i program the 2009 vin with GM MDI ??
  5. M

    brand new GMAX-6R and 1056 P0741

    just built a LMM 6 speed with Gmax 6R w/1056 lockup valve modified, Mike L reg spring kit, taps cleared and fast relearned with tech2 and throw P0741 customer run a edge evolution on tune 5.... what i did wrong ?? any idea ?? thank you for your help
  6. M

    LB7 shift range inhibited no code

    hi guys i need help 2003 LB7 with built trans LLY(5k ago) and i got Reverse but when i put it on Drive after 2-3 second it goes to neutral and show shift range inhibited.....put on the lift wheel off the ground and fuel it before 3 second and do all gears but on the ground nothing except...
  7. M

    need help to cool down tranny temp

    hi guys im running a LMM with PPE stage 6 with PPE(mike L) trans cooler w/ 5/8 hoses PPE deep pan w/1055 suncoast and my temp is at 200-210-220* with QuatraSyn oil...what else can i do to cool it down ?? and how hot QuatraSyn can take ? do i need to put another cooler w/fan ?
  8. M

    Snake oiler needed

    Hi guys Someone have the C3 oiler ready to ship ?? i need at least 2 kit thank you
  9. M

    C1 Clutch Control Valve & Seal Kit

    is the C1 Clutch Control Valve & Seal Kit by sonnax is a great upgrade for a built trans ?? http://www.sonnax.com/system/announcement/37000-05K.pdf
  10. M

    allison built hi temp

    Hi everybody. i m running allison fully built w/1055 5/8 hoses PPE cooler PPE deep pan snake oiler and i like to lower the trans temp any idea ?? if im in traffic the temp goes at 220* and when i drag 2 run (1/8) temp will be at 200* running 750rwhp DD and may be 1000rwhp when i drag running...
  11. M

    shift adapt w/tech 2

    if i reset the tap 4th and 5th with tech 2 can i do it on drag strip with WOT ?? what's the best way to do it on built allison 6 speed i run twin about 900-1000rwhp
  12. M

    P0847 p0700 code

    Trans just built and change pressure switch still get these code p0847 and p0700 . When i put the truck in reverse or drive it s like the converter was locked i have to put my foot hard on brake and the engine shut down need help please btw it's a 2002 5 speed
  13. M

    8.1 allison question

    8.1 allison and duramax allison is it the same transmission ??
  14. M

    Clearance info on built trans

    need Clearance info on built trans When it say .060 to .075 (c3-c4) which is the best .060 or .075 ?? What is the best clearance to hold big power on twin
  15. M

    somebody run PPE twin GTX45/GT40

    somebody run PPE twin GTX4508/GT4094 on a LMM ??????
Top Bottom