Search results

Search the forum Search Articles
  1. CaptPhil

    LLY P0335

    Well the old girl let me down finally. Truck ran fine, sat for a month then no start. Gives about a 2 second crank, then stops. Code is P0335, crank position sensor. I've read about every thread there is online about this. Scanner shows no rpm during crank. Reluctor wheel is solid. Replaced...
  2. CaptPhil

    LLY: F*****G brake lines

    Old LLY left me stranded for the first time tonight. Was rolling down some backroads headed to the boat to go fishing tomorrow morning and had a car pull out in front of me. Hard on the brakes and then foot to the floor and no brakes left. Fortunately I didn't crash. Split the front line...
  3. CaptPhil

    1600hp on stock 6r140

    MPD claims 1622hp on spray through the stock 6.7 6r140. I realize that it is on a dyno and not the street, but still having a hard time believing it. https://m.facebook.com/story.php?story_fbid=1045188452206434&id=114242541967701 Sent from my SM-G900T using Tapatalk
  4. CaptPhil

    "Built" transfer case?

    So maybe I am out of the loop, but got into an interesting disagreement earlier with a gentleman on the book. basically he recommended a local shop I've never heard of for a trans build. said the guy was building him a 1000hp trans with a LIFETIME WARRANTY. Said work included billet parts...
  5. CaptPhil

    Loud knock, black smoke

    Driving my stock truck yesterday, gave it a little half throttle pull from 65-90mph, literally half throttle, fifth gear. Slowed back down to normal and it started knocking bad on one cylinder. Drove it home sounding like a tractor, fortunately was only about three miles. It accelerates fine...
  6. CaptPhil

    What converter is this

    No markings on it other than the number 20. Very nice billet half of the case. Being black I was thinking either ppe or goerend. Sent from my SM-G900V using Tapatalk
  7. CaptPhil

    2005 Gmc 2500 duramax

    CaptPhil submitted a new Showcase Item: 2005 Gmc 2500 duramax Read more about this showcase item here...
  8. CaptPhil

    White devil hit the track...

    In case you haven't seen my thread about the white devil. http://www.duramaxdiesels.com/forum/showthread.php?t=63403 Well the track was open.... Tune 1, 1450usec, 11.80@121. screwed up and turned the lockup switch to factory so I didn't get lockup until almost 100mph. Tune 2, 1650usec...
  9. CaptPhil

    The White devil

    A bit over a month ago I hurt the trans in white devil, formerly great white, also known by some other names that aren't appropriate for public. The majority of the issues I was having I kept to myself since they were relatively small things that I am fortunately able to fix myself, but after...
  10. CaptPhil

    Whine at idle

    I have been chasing a couple issues since buying this built truck, haven't really solved much yet. This is one of them. The truck has a whine at idle when cold. You can clearly hear it in this video. When the truck warms up it goes away mostly. It doesn't seem to be the power steering since...
  11. CaptPhil

    Cracked turbine housing

    So I bought nicks truck a few weeks ago, drove it home from nc to de. Didn't go wide open with it because the cp3 controller wasn't working. After I turned the tune way down I couldn't go close to wide open without hearing this: Lly rattle: http://youtu.be/EcgnmAtYyck Pulled the center section...
  12. CaptPhil

    Dual Fuel maxing rail at Idle

    I bought Nick Murdocks built truck a few weeks ago, havent gone down to pick it up yet since I had to come back to Korea for work. He started it to take it to the paint shop to get the roll pan sprayed and upon startup it went straight to max rail. Truck has a stock CP3 in the valley and an...
  13. CaptPhil

    Cracked LML pistons

    Just saw this on FB from Blackout Performance. LML came in for head gaskets. Had a mini maxx and exhaust. When they pulled it apart it had 5 cracked pistons in it. All four on one side and one on the other side.
  14. CaptPhil

    Fuel Pressure vs power

    I put an LBZ fpr in my truck and changed the fuel pressure tables to take advantage of the increased capability. Say you have two tunes that are virtually identical, only one has fuel pressure at 165mpa (24kpsi) and the other is 180mpa (26kpsi). The first tune (165mpa) holds 19.5-20kpsi...
  15. CaptPhil

    Exergy Turn around

    How long of a turnaround time have most people seen when sending injectors in to Exergy? Trying to plan a time to send them in when i wont miss the truck too much. Thinking about just going with 60%'s. This engine will get built eventually, depends on when it breaks.:woott:
  16. CaptPhil

    2005 Chevrolet 2500hd

    CaptPhil submitted a new Showcase Item: 2005 Chevrolet 2500hd Read more about this showcase item here...
  17. CaptPhil

    In the 12's

    Ran the truck for the first time Wednesday night. Made 8 runs, best being a 12.62 @ 109mph with a 1.79 60'. Truck definitely has more in it, at least a couple tenths. Ran a 12.66@109mph with a 1.92 60', so with a better 60 that run would have been deep in the 12.50's. Just installed a...
Top Bottom