Search results

Search the forum Search Articles
  1. DuramaxRamRod

    Ordering a new 2020??

    Are you planning on keeping it stock? That's what really holding me back from the 2020s is the unknowns. Wheny first released the new style I wasn't a fan like everyone else. But it has grown on me and the High Country front end does look good which I'm sure they did on purpose.
  2. DuramaxRamRod

    Ordering a new 2020??

    I'm in between going for a 2019 or 2020 leaning towards the '19. Whats drawing you to the 2020?
  3. DuramaxRamRod

    So Mike, What's this new 9 speed?

    How do the lower rated models found in the Durangos and Jeeps hold up?
  4. DuramaxRamRod

    LB7: Rough idle after new injectors

    I would check the injector lines at the rail. I've had one rattle loose and another because I didn't tighten it enough. Same symptoms you are having diesel everywhere and spraying a fine mist that looked like smoke. Its hard to see it at idle with the low rail pressure, I stood back and had...
  5. DuramaxRamRod

    LB7: Difference in cali emissions lb7

    The intake Horn has a flat spot on the outside at least to make room for the valves in the y-bridge.
  6. DuramaxRamRod

    Price Tag

    https://charlotte.craigslist.org/cto/d/2006-chevy-silveradox4-lbz/6685734895.html
  7. DuramaxRamRod

    Rust inhibitor

    I think I read it in one of your other posts, you just use waste oil and spray it down? Are you misting it on and just letting it sit for awhile?
  8. DuramaxRamRod

    20w-50 oil

    I run my autocal to my laptop and read it there.
  9. DuramaxRamRod

    19x

    I appendix my 19. I could appendix a 17 but the grip sticks out too much for me.
  10. DuramaxRamRod

    19x

    Based on your likes/dislikes it sounds like it's for you lol. I have a gen4 19 fits me perfectly. I have a gen4 17 frame that I only have a .22lr upper for that fits me fine, I don't find that the slide is that much longer.
  11. DuramaxRamRod

    LB7: New to LB7s

    I couldn't remember if it was 02 or 03. Thanks for clarifying.
  12. DuramaxRamRod

    LB7: New to LB7s

    Mine did. IIRC started in 2003 with California, New England, and fleet emission compliant trucks. They also came with a cat, vacuum pump and heads that don't flow as well as the federal emisssions heads.
  13. DuramaxRamRod

    LB7 Quadrasteer Suburban

    I see it now, I was just wondering 80°C seemed hot. Which tank does the return dump into, the main saddle tank?
  14. DuramaxRamRod

    LB7 Quadrasteer Suburban

    Did you mean °F? I thought the sweet spot was ~70°F for diesel.:dontknow:
  15. DuramaxRamRod

    Failed inspection

    If I had the money...
  16. DuramaxRamRod

    What did you do at work today?

    I passed you yesterday when you were getting on 495-NB, had to do a double take.
  17. DuramaxRamRod

    Help: Any Massachusetts Cops on the forum???

    There is a 7 day grace period for vehicles registered in Mass where you can transfer the old plates and registration to a vehicle of the same type. Which is probably what the Boston officer was most likely thinking of. http://www.massrmv.com/rmv/faq/registration.htm#16 If you asked five other...
  18. DuramaxRamRod

    Whats your fav cab lights?

    - '07.5+ Driver Side Cab Light (GM Part #: 20966091) - '07.5+ Passenger Side Cab Light (GM Part #: 20966092) - '07.5+ Center Cab Light (GM Part #: 20966093) - '08-'12 Cab Light Wiring Harness (GM Part #: 22823370)
  19. DuramaxRamRod

    Do they make a egr delete kit for 04 lb7 duramax

    http://www.trucktrend.com/how-to/engine/0704dp-socal-diesel-duramx/#photo-05
  20. DuramaxRamRod

    Decided to turbocharge the daily driver

    Should be a fun project. I just watched this today, they used a 7.3L turbo on it. WcjC00J8FaM
Top Bottom