Search results

Search the forum Search Articles
  1. Bbuchanan11

    Well there goes my chances of 9s this year

    Another angle of why I didn’t like the y bridge being that long
  2. Bbuchanan11

    Well there goes my chances of 9s this year

    Little update haven’t done much been redoing the last 2 pipes haven’t touched the wiring harness… little before and after of the y bridge my buddy does all of the pipe work and made the intercooler he wants to get rid of the last rubber boot which is the 4inch going in to the 366.
  3. Bbuchanan11

    Well there goes my chances of 9s this year

    Yeah that’s what I was thinking about doing just ordering some pins, I think my dad has the tool to crimp the pins and just cut the wires at the bail connector.
  4. Bbuchanan11

    Well there goes my chances of 9s this year

    Thanks man and yeah I got tired of trying to work around the upper rad hose or having to drain the coolant… but first time I had the engine out I completely stripped the harness took out every wire/plug I didn’t need and recovered everything. Now everything that goes to the passenger side of the...
  5. Bbuchanan11

    Well there goes my chances of 9s this year

    Thanks guys I appreciate it! And I have no idea who made this turbo kit I know it’s pretty old and we reworked a lot of the piping.
  6. Bbuchanan11

    Well there goes my chances of 9s this year

    Getting pretty close to start putting the front end back on. I’ve been putting off cleaning up the wiring harness I have miles of extra wire that I don’t know what to do with so I’ll probably end up taking a break for a while.
  7. Bbuchanan11

    Well there goes my chances of 9s this year

    Thanks man… hope to see some updates on your thread soon.
  8. Bbuchanan11

    Well there goes my chances of 9s this year

    I really don’t know but the way the piston or what’s left of it had broke right down the middle looks a lot like how most of them break. But it being right at the top end of the track it was well over 4k rpm… i ended up going with a 2020+ oil cooler this time to try help oil temps a little.
  9. Bbuchanan11

    Well there goes my chances of 9s this year

    Thanks iron worker!…and I went forged fingers this time.
  10. Bbuchanan11

    Well there goes my chances of 9s this year

    Same turbo set up billet 488 over box stock borg 66
  11. Bbuchanan11

    Well there goes my chances of 9s this year

    Made some progress over the weekend
  12. Bbuchanan11

    Well there goes my chances of 9s this year

    Picked my engine up from Isaac this morning and started throwing it together.
  13. Bbuchanan11

    Looking for Allison build/install options near Virginia.

    Yeah trans go does make a converter valve I remember my kit had one years ago like probably 10 years ago.
  14. Bbuchanan11

    Looking for Allison build/install options near Virginia.

    You may be thinking of the kit that comes with the converter valve or whatever it’s called… the transmission has to be removed to replace it.
  15. Bbuchanan11

    Well there goes my chances of 9s this year

    It’s crazy how light it is though..
  16. Bbuchanan11

    Well there goes my chances of 9s this year

    No I have a buddy that lives close to me that is really good at doing piping and used to work for a company doing cages… he has a twin turbo bmw with an ls motor he built and did all titanium. I didn’t feel like spending all the money to change everything over lol
  17. Bbuchanan11

    Well there goes my chances of 9s this year

    Any changes I’ve made to mine so far have all been stainless as well.
  18. Bbuchanan11

    Well there goes my chances of 9s this year

    I just looked that billet one up that’s a nice piece… it would be nice to put an o ring flange right there at the end for the vibrant clamps to be able to remove the whole pipe easily..
  19. Bbuchanan11

    Well there goes my chances of 9s this year

    And as far as installing it you can’t change the cp3 with the y bridge on the engine
  20. Bbuchanan11

    Well there goes my chances of 9s this year

    So I bought this truck back in 2017 it had the bed cut out hood stack twins on it already I have no idea who actually made all the pipes I’ve had a lot of it re done just because of the rubber boots.
Top Bottom