Is this a thing on the LB7?
I feel like I saw a table I could tweak to get my mpg and range more accurate but can’t find it now. Maybe I was dreaming?
MPG and range went way out after adjusting my speedo for my tire size. Was within .5 mpg, now it’s out by almost 3. Kinda annoying.
Those rubber lines going from the frame hardlines to the ones on the engine are known for going bad internally too. 20 y/o truck I’d be looking at stuff like that before spending big bucks on regulators and pumps etc. I’d start by rebuilding the filter head and if it still acts up hook up a...
Found a 6 bolt cardone on rockauto if anyone was interested in trying it. P/N-978418GB
FWIW the BBB reman I put on is not impressive to say the least. It was much better than the worn out one I took off but has a lot more play in the steering wheel than I like. I don’t see it lasting long.
I’m going to be doing a lift here right away and want to put new bearings in the new knuckles. Was looking on rockauto and it seems no matter the brand (With the exception of Mevotech where their HD part is corrosion resistant coated) they all have 2 or 3 different grades where the only real...
These are gonna look sic. But I’ve never seen so many liars outside of our government as there is on custom offsets. There is no FN way guys are running this size on level kit only. I can barely clear the bumper and if I had all my fender it would rub hard.
So looks like I’m gonna have to...
Rebuild the filter head and huck a new filter at it. Then find some diesel 911 and put that in the tank. You just fixed your problem fairly cheaply if it’s either of those two things.
After that you’re going to have to investigate deeper if the problem persists. Anything from a failed rubber...
Ha! Try looking for forged in even 20x12 nowadays. KG1 and Force laughed at me and said they were a special order. Everyone wants 22’s and bigger and -44 or -76. It’s ridiculous.
I wanted some flow forged XF wheels but they have nothing available. These came up on a one day sale 40% off so I...
Dropped a couple bills on these today. Cali Off-road Summit’s. 20x10 -25. I’ve got some almost new 295/60 Toyo R/T’s to put on them. Hopefully the leveling kit turned up a bit is enough. Otherwise I’ll be looking at a Zone adventure series 3.5”or a 4-6” lift which I’m trying to avoid doing.
Been busy last couple weeks. Got a mild built trans from Dallas at SDS and tossed that in but not before installing a downpipe. Glad I did it with the trans out as those bolts were not going to come out from up top. 3’ handle 1/2” drive ratchet from underneath and I had to put out to break them...
eBay you say.
Haven’t been on eBay since I got scammed on some shitty Honda parts years ago. Might have to give it a look.
Only thing that used to suck about eBay was cross border shipping costs was awful. Not sure if it still is or not but I’m only an hour from the border now so that helps.
Anyone know where a guy can find a replacement bowtie for the grille in an ‘03 up classic?
My gold one was broken and the 3D printed one I found does not fit an HD grille very well so looking to improve my bow tie situation.
Found an open in the power wire and a green pin in the TCM connector on the harness side. Repaired wire, replaced the pin. All good now. Just abs codes left.
285/45R22 tires coming, 22.5 alcoas have been milled down so it’s going to be sweet. Tow tune and send it.