Search results

  1. 05_LLY

    front suspension

    We have been running coil overs for a few seasons now....I think it works pretty good once dialed in.....
  2. 05_LLY

    Duramaxzak 2.6 pulling truck build

    Nice Build!:thumb:
  3. 05_LLY

    Duramaxzak 2.6 pulling truck build

    We bent this one,THis housing was towed in over 2"" at the edge of the tires, we bent DRW housing after this one not as bad but it junked a 3.42 pinion out the side of itso was junk either way, running a Braced dodge aam 11.5 now with the 4" tubes, so far so good!
  4. 05_LLY

    Help: Park / Neutral Light

    I know on a lly it was the green wire at the NSBU switch, I cant rember if it was ground or power though, use it to pull a relay in for the light.
  5. 05_LLY

    Hydraulic assist steering

    WE use a 12v snow plow pump from grainger, you will have to get a new feed line from the pump to the brake booster made, then just bring each return back to the pump! pretty easy....makes a world of difference in steering especially with all the weight on the front! takes the belt drivin pump...
  6. 05_LLY

    Broken Crankshaft Count?

    Finally lost mine in my lbz tow rig, 251k on the clock, 40 overs modded stocker twinz, made roughly 650/680rwhp, I was never easy on it, have used it at max power towing over 21k more than a hand full of times, figured I was outta the woods if it didn't break yet....oh well, time to make...
  7. 05_LLY

    Dhd axle spline

    :thumb:
  8. 05_LLY

    Dual conversion question

    depending on the tire. we ran 33/12.50 on 17" gm dually wheels, a 3" spacer on the hub put the tire about 1/2" from the leaf spring.
  9. 05_LLY

    Anyone else ever broke a Burkhardt axle?

    Buddy of mine broke both the drive flanges on a set one night two seasons ago, it was an early set too I do believe!
  10. 05_LLY

    Billet S468

    So true:thumb:
  11. 05_LLY

    1058 stall.

    Napa gold pads on all four corners, napa premium rotors on the rear and SSBC sloted rotors on the front, nothing to great! properly bleading the brake system helps a great deal. 265 /17" tires, 3.73 gears
  12. 05_LLY

    1058 stall.

    Actually tried it again today it still wasent pushin at 2700 on the tach.
  13. 05_LLY

    Who is running AF (alternate firing) order cams, and for how long?

    He was plenty decent enough for me.
  14. 05_LLY

    Who is running AF (alternate firing) order cams, and for how long?

    I did Talk to Chad today, he said my harness is leaving today and refund will be done in the am.
  15. 05_LLY

    1058 stall.

    I can brake stall mine to about 2400 1st high range in my DD.
  16. 05_LLY

    Who is running AF (alternate firing) order cams, and for how long?

    Sounded ok on the phone, but.....still no refund or harness has been received.
  17. 05_LLY

    Who is running AF (alternate firing) order cams, and for how long?

    Things get better and worse, :mad:I call EDP Monday, told the phone jocky to cancel my order and overnight me my harness back, still no harness..... :thumb:Danville Had a Socal 9100AF on the shelf, told him to send it Monday std ground shipping I hold it in my hand by noon on wed...
  18. 05_LLY

    Who is running AF (alternate firing) order cams, and for how long?

    No sir, no shittin involved......yet anyways:D!
  19. 05_LLY

    Who is running AF (alternate firing) order cams, and for how long?

    I read that friday, that was the straw that broke the camels back for me, cut my losses now, hope I get my harness and refund back.
  20. 05_LLY

    Who is running AF (alternate firing) order cams, and for how long?

    Empty promises! I ordered the cam solely based on the, "youll have it in two weeks comment " so I gave my cc info, cc got charged that same day (4/1/14). I gues it was a 1200.00 april fools joke. since I still have no cam, twice now have gotten the 2 more weeks comment , with the last one 5-9-14...