Search results

Search the forum Search Articles
  1. LBZ

    Who machines C3 apply plates these days?

    It does. I have one of his trans in my truck with that setup. Shifts great drives great.
  2. LBZ

    LMM wheel bearing on a classic

    Thanks, but I have an ‘03. No stabilitrak or anything so troubleshooting is a bit different. I have alldata access, just didn’t yesterday where I was so just wanted to know if anyone knew if the hubs were different between classics and LMM’s. Pretty sure the problem is on the truck side not the...
  3. LBZ

    LMM wheel bearing on a classic

    Will an LMM wheel bearing work on a classic truck like my ‘03 as far as the abs sensor goes? I know the hub will fit, but will the sensor work? Just put some ac delco hubs in my ‘03 that the 20980075 p/n says are for a bunch of different vehicles including LMM’s but I have an abs code now for...
  4. LBZ

    05 transmission in 02 truck?

    Yes. But the OP wants to go the other way. ‘05 trans into an ‘02. He shouldn’t see any codes.
  5. LBZ

    05 transmission in 02 truck?

    I thought you would only get a code if you added the wire for it that the 7’s didn’t have? It was my understanding that if you used your normal external harness it didn’t even know it was there and no code would come active.
  6. LBZ

    01-10 steering box redhead ,PSC ,OEM

    Difference being?
  7. LBZ

    Good Shop in Oakland California area?

    300 is low I agree. And I only checked one hole. But I’ve seen trucks running fine lower than that. Just down on power and were hazy. But not noisey. That said I only checked the one hole on this truck so it may other issues being it has over 350 miles on it.
  8. LBZ

    How much should I trust FASS filtration?

    I’d risk it if it was filtered good and going into a 12v Cummins. In a common rail? Not a chance though.
  9. LBZ

    05 transmission in 02 truck?

    Cooler line fittings are different size/thread. You will need to swap bellhousings or get different cooler lines. The hose kits for replacing the cooler hard lines with hose often have fittings for both the ‘01-‘02 and ‘03-‘05 in them. Other than that no difference other than the ’05 has ( I...
  10. LBZ

    01-10 steering box redhead ,PSC ,OEM

    As long as the line ends are the same that’s the important part.
  11. LBZ

    Good Scan tool recommendations

    Don’t recall. It starts with a 2 and is the Bluetooth model.
  12. LBZ

    Good Shop in Oakland California area?

    An Autel and a snap on. Not sure of models. I remember some talk about this years ago but I don’t recall if anything concrete was found. I haven’t seen or encountered this issue myself. Oh and a correction buddies truck is an lly not a Z. Sounds like he’s getting it hauled to the border and he...
  13. LBZ

    Good Shop in Oakland California area?

    Well a balance rate would tell you where the issue hole is no? And if that matches up with the area of the noise…….cut it out and see how balance rates change should tell you if you’re cutting out the right hole. Or unplug them one at a time.
  14. LBZ

    Good Shop in Oakland California area?

    Buddy had a local come to his hotel with an Autel scanner and did some tests. #8 cylinder was the one doing the knocking. Changed out the injector, still knocking. Cut the cyl out and it goes away. Ironically I was working on a Z recently that had the same symptoms and did the same - replaced...
  15. LBZ

    Good Scan tool recommendations

    Buddy has the Autel. It works pretty good. Bluetooth to the dongle that plugs in the OBD port. Only thing I couldn’t find was cyl contribution testing and obviously it can’t flash but can do most everything else a guy needs.
  16. LBZ

    01-10 steering box redhead ,PSC ,OEM

    Old hoses expanding under pressure maybe more than they should??
  17. LBZ

    Good Shop in Oakland California area?

    Thanks. I reckon Solano is closed till Monday? If he does end up there who should he ask for?
  18. LBZ

    Good Shop in Oakland California area?

    He had it at all bay diesel in Oakland and they tried to sell him an engine rebuild but couldn’t even tell him what his balance rates were or compression so I dunno.
  19. LBZ

    Good Shop in Oakland California area?

    Fellow Canadian is down there and developed a gnarly knock. Looking for a reputable diesel shop to take his truck to.
  20. LBZ

    Table for calibrating fuel mpg ?????

    It only had a 265 on it before so the percent it was out was pretty close to the difference in tire size. Now that I run a 34” tire and corrected it for the speedo it’s way out. I’ll look again tonight and see if I can find the table but if someone finds it first that would be sweet.
Top Bottom