Search results

Search the forum Search Articles
  1. Lennydmaxguy

    Stock lly tune and os

    Here you go
  2. Lennydmaxguy

    Colorado speedometer won't correct.

    Any time
  3. Lennydmaxguy

    Colorado speedometer won't correct.

    Yes, the V8 editor has a built in calculator. Since you know the MPH change you need, I would go to the Speedo Fine Tuning tab, enter your values, and then multiply H0105 by the correction value given.
  4. Lennydmaxguy

    Colorado speedometer won't correct.

    I'm not sure why that wouldn't work, but I can say from my experience that changing H0105 corrects the speedometer.
  5. Lennydmaxguy

    New toy

    Nice! I'm currently restoring a long bed 82 myself.
  6. Lennydmaxguy

    LB7 LML Allison 1000 conversion & swap ext.

    You're swapping the whole powertrain, or just the transmission? As Jason said, it really not worth it either way. You could swap the valve body from the 15 trans to yours, but it will require a lot a wiring changes internally to make it work. Then you will need a tune to enable 6th gear...
  7. Lennydmaxguy

    Axiom & Reaper Axle "Group Buy/Forum Discount"

    I had a bad experience with a Kryptonite wheel bearing. Brand new out of box it had a bad tone ring. Couldn't see the problem, but it showed up in scanner data. I had to buy a new bearing and ship the old one back, I paid shipping both ways BTW, before they would credit me. Also, the new bearing...
  8. Lennydmaxguy

    buying a 1500

    I'm just curious, did he have a remote tune or dyno tune? I've done lots of basic DOD delete tunes, and if there's a good source for especially trans tunes, I'd like to look into it.
  9. Lennydmaxguy

    LMM tune help - WILL PAY$$$

    In addition to the good advice above, there's a lot of good info and some tunes right here on the forum. You don't want to flash any random tune directly into your truck, but you can compare them to stock and get an idea of what changes are needed.
  10. Lennydmaxguy

    Glow plugs

    My observation has been that the L5P is a lot more picky about what it will flag as a "bad" glow plug. There are 4 or 5 different fault code descriptions, compared to 1 or 2 on older trucks. But it's probably also a sign of the decline in quality that seems to affect just about everything, sadly.
  11. Lennydmaxguy

    LM2 tuning?

    So, yes. The Start/Stop controls are in the ECM. But HP does not have them mapped. Nothing a little custom mapping can't fix though ;)
  12. Lennydmaxguy

    LM2 tuning?

    I would double check if you have a E46 or E66. The pickups had the E46 up to 22 but SUVs got it sooner. I'm 99% sure the controls are in the ECM. I'll look into it more later
  13. Lennydmaxguy

    L5P L5P Tuning

    I'm not aware that 24+ can be direct flash unlocked yet. 18.5-23 yes, but the 24+ are mail-in unlock
  14. Lennydmaxguy

    L5P L5P Tuning

    Motorops won't sell to the US anymore AFAIK. You can probably find a smaller operation who will do MPVI tunes still, but most of the bigger names are pushing the RTD really hard
  15. Lennydmaxguy

    Looking for guidance and backup support before flashing LB7 (EFILive / LDS tunes / DSP5 / emissions)

    This is what my service info shows for the 01. Looks like it would match what you have. You'll want A & B
  16. Lennydmaxguy

    L5P SOTF HPT vane position not working

    You probably have all the SOTF Enable switches turned on?
  17. Lennydmaxguy

    LB7 DSP5 with SAC45s, LBZ reg, Built Trans

    Unless you have plans to upgrade your transmission very soon, I wouldn't bother using any of the power levels from this tune. You could try copying the stock level pulsewidth table to your truck and see how it runs. 30% and 45% aren't a huge difference
  18. Lennydmaxguy

    Bought and sold a 2016 Colorado

    On the subject of heated gear, these trucks are real simple to add a heated steering wheel if you don't have it already. I did it to mine. Just need a new wheel and possibly a power supply wire, depending on whether the truck came with it or not.
  19. Lennydmaxguy

    CP3 Replacement Outlet Fitting

    I'll shoot you a text tomorrow, Brad
  20. Lennydmaxguy

    CP3 Replacement Outlet Fitting

    I'd like a new, or like new one if possible
Top Bottom