Search results

Search the forum Search Articles
  1. Utahski

    Ultimate Callout Challenge watch

    No idea. I left about 8:15.
  2. Utahski

    Ultimate Callout Challenge watch

    This track isn't usually very well prepped. Then the altitude thing.....lots of people used to low elevation don't realize how much effect it has. Salt Lake City is about 4400' elevation, and during race season the temp will be about 100 degrees or more out there. Yesterday's temp. was a very...
  3. Utahski

    Ultimate Callout Challenge watch

    The trans had problems and broke after a couple runs. They pulled it in the pits, the builder took it apart. Didn't get it back in before the 8pm deadline.
  4. Utahski

    Ultimate Callout Challenge watch

    Yes. And that truck is a beautiful piece of work.
  5. Utahski

    SDP Twins or Danville 68mm Daily Driver

    I had that setup for a couple years on a stock engine, stock injectors. It was very nice, drove beautifully. Think I remember the big tune was about 550hp uncorrected at 4400' elevation, on a mustang dyno.
  6. Utahski

    Cknight199 motor build thread

    Probably very few pumps blow up on the dyno, I thought it could have been mine. That pump was a 12mm stroker by FloorIt Diesel. It was only 3 months!! old.......completely ruined.
  7. Utahski

    Cknight199 motor build thread

    When was that? Do you remember the truck?
  8. Utahski

    Anybody running rear wheelwell liners?

    You can make your own, I've done it. Do a posterboard cut and try pattern. The first set was .090" ABS which isn't easy to work with and it was time consuming. After a few years it got brittle and cracked. The current set is made from 1/8" stiff neoprene which works really well. It's very...
  9. Utahski

    Symptoms of a broken valve spring/bent pushrod?

    Broken valvespring is not good. When one of my high dollar aftermarket valvesprings broke, what began as a slapping noise escalated quickly to a very loud knock that sounded like hammer blows. The valvehead had broken off and riveted itself into the piston crown. The hammer blows were that...
  10. Utahski

    Nitorus and the diesel

    Your head is WAY up your ass.
  11. Utahski

    Who's running TRIPLES and how do you like em verses compounds

    Mine have Levi's blankets on all 3 turbine housings and the complete hotpipe. Heat isn't a problem. Blankets should be part of any compound setup.
  12. Utahski

    Considering Getting EFI Live

    Don't "consider" it, do it.
  13. Utahski

    4.67 @ 164.71 1/8 mile Time slip .

    What would make you think a NA gas engine was anywhere near comparable to a turbo diesel with lots of boost?
  14. Utahski

    Dry Sump for the Duramax.

    But........he has a RACE PROGRAM (whatever the hell that really means) And a FAN CLUB (he's the only member) He just wants people to tell him he's wonderful.
  15. Utahski

    Who's running TRIPLES and how do you like em verses compounds

    I'm on set #4 now. First two were compounds......a 475/stock on a stock engine, then a 480/366 on a built engine. Then two sets of triples...62's/HTT366 which was changed to 371. Now it's gtx4088's/468. The compounds drove really beautifully and were nicely responsive. The first triples...
  16. Utahski

    Brodix cylinder heads for the Duramax

    There it is. You knew this clown would have to be taking credit for it.
  17. Utahski

    1057 with Twins and Street Manners?

    I had that exact combination for a couple years and it drove beautifully.
  18. Utahski

    D'bag Audi A8

    This , is a comma This . is a period.
  19. Utahski

    LLY: Engine whine/turbo whine

    I had what sounded like louder than usual turbo whine. It varied according to rpm. Noticed it one day when the radio wasn't on and thought it was just my imagination, that it was turbo. This went on for a few days. Did some dragstrip runs on Friday evening, next day on the dyno the stroker CP3...
  20. Utahski

    Heat wrapping ppe manifolds and up pipes

    Definitely put them on exhaust, and turbine housings. Keeps the heat where it's supposed to be and reduces underhood temps by a good bit.
Top Bottom