Search results

Search the forum Search Articles
  1. DuramaxRamRod

    LB7 Exhaust Size Preferences

    http://www.duramaxdiesels.com/forum/showthread.php?t=67600
  2. DuramaxRamRod

    Fast CC/SB

    fa-eP9aAtwo
  3. DuramaxRamRod

    2017 Duramax

    The new superdutys look like F-150s from a 5-10 years ago. UGLY
  4. DuramaxRamRod

    Opinions/pics-- Your 5" exhaust systems

    I cut the pipes according to the install sheet, however the mid pipe assembly hangar was way off. I was able to heat it and bend it close to get it to fit. I also had to remove the rubber isolater from the front pipe because it was holding it against the trans cooler lines. Magnaflows front...
  5. DuramaxRamRod

    Opinions/pics-- Your 5" exhaust systems

    I put magnaflow #18982 on, because it was the cheapest and it exited at a 90 degree angle. However when I put it together some of the hangars were off by bit including the tailpipe section. Instead of being uptight to the body, it hung down quite a bit and looked awful. I finally took it off...
  6. DuramaxRamRod

    MA inspection stations

    Where in Worcester county are you? Have you tried Berlin?
  7. DuramaxRamRod

    Broken Crankshaft Count?

    Did you vote already on the poll? It has you listed under LB7/LLY.
  8. DuramaxRamRod

    Dodge brake conversation

    Fair enough, I've got to go through the braking system as well to get a firmer pedal back. Have you thought about using braided stainless lines instead of rubber?
  9. DuramaxRamRod

    Dodge brake conversation

    The way I read it, it sounds like the 2004 is a dodge with terrible brakes not a GM.
  10. DuramaxRamRod

    Air Filter Life

    If you get a dry filter I'd suggest running a prefilter to extend the filters life. The Volant airbox seems to pull in quite a bit of outside air, and as a result can get pretty dirty. You can see how bad the pollen was this year and what didn't make it into my filter.
  11. DuramaxRamRod

    Need some advice.

    Take a look for yourself http://www.duramaxdiesels.com/forum/showthread.php?t=63908
  12. DuramaxRamRod

    The build is a GO!

    What made you go back with the second battery?
  13. DuramaxRamRod

    Which tune level for stock LML with stock trans?

    Its worth 40hp on a stock tune http://www.duramaxdiesels.com/forum/showthread.php?t=63908
  14. DuramaxRamRod

    Cali lb7

    I used a Profab plate for the up pipe, my own plate for the y-bridge which leaks a little and <2' of 5/8" heater hose to delete it.
  15. DuramaxRamRod

    LML mods and dyno testing begins

    So this was the same tune that made 475 RWHP with the intake?
  16. DuramaxRamRod

    LB7: P&p IHI with billet wheel vs stealth 64mm

    Some searching turned up these specs: compressor 60.3mm inducer 82mm exducer turbine 68mm inducer 62mm exducer (Don't hold me to them)
  17. DuramaxRamRod

    Figured out the hazing issue

    That only happens after you loosen the injector lines. http://www.kennedydiesel.com/docs/Duramax%20LB7%20Injector%20Line%20Corrosion.pdf
  18. DuramaxRamRod

    This thing is Laggy on bottom end

    I don't think they are Detroits. 6 x V16s @ 11,000 HP each
View older results
Top Bottom