Search results

Search the forum Search Articles
  1. bullfrogjohnson

    batmo turbos, fact or hype?

    Cast 75mm wheel Bullseye Billet 75mm The billet wheel looks alot lighter to me:confused: I would save your money and buy a killerbee lly overheat kit.
  2. bullfrogjohnson

    Off Season Sled Pulling Mods

    Its a PPE pedistal and a spacer block that johnboy made. Then I had everything ceramic coated chrome:D
  3. bullfrogjohnson

    Off Season Sled Pulling Mods

    I am still working on rewiring the engine compartment and I wanted it out of the way.
  4. bullfrogjohnson

    Off Season Sled Pulling Mods

    Took a while but she is finally back in the hole!
  5. bullfrogjohnson

    Dual Fueler Belt Routing with Van coolant bridge.

    I sent Dan a PM about it and he had no clue what I was talking about:confused:
  6. bullfrogjohnson

    LB7: injector cup removal tool

    I knew I should have put a patent on it:rofl: Its definitely not rocket science. If my tool and write up helped one person save time and money it was worth alot more than trying to make a killing on ebay. These trucks are expensive enough already to play with. And for 75 dollars for that...
  7. bullfrogjohnson

    Question: Anyone know about Toyota 99 Avalon?

    Should just be a a reprogram with the new chip key and registering the new chip #.
  8. bullfrogjohnson

    Thank you Mike

    Mike has answered the phone everytime I need his help. He has helped me out alot over the years. I appreciate all the help and knowledge youv'e shared with me over the years:hug:
  9. bullfrogjohnson

    "Built" Allison longevity?

    It depends who builds it and yes they can live for awhile. I have 50K+ on my original trans build. It has not been treated nicely either.
  10. bullfrogjohnson

    To our suprise...

    Congrats Todd!
  11. bullfrogjohnson

    Which turbo?

    Garrett chargers are always on the leading edge. Most popular borg chargers are copys of garrett turbos. If you dyno any size garrett turbo on a truck and swap out to same size borg turbo the garrett will make more power every time.
  12. bullfrogjohnson

    Which turbo?

    Both turbos will need an install kit. A Garrett will always out perform a Borg charger. The 366 will be cheaper to buy and cheaper to rebuild in the future.
  13. bullfrogjohnson

    Custom CP3 lines

    I believe Shane at wicked can do them also.
  14. bullfrogjohnson

    sledding video from this past weekend

    I have never seen that much snow in my life! Looks like alot of fun. Question though, what happens when your hauling ass and you hit a hidden ditch that has 10ft of snow in it?
  15. bullfrogjohnson

    Results from duel fueler?

    I only put about 1500 street miles in that 2 years and about 30 sled pulls. Max effort tuning. I never did go WOT on street either. I knew i was on borrowed time so I picked my battles.
  16. bullfrogjohnson

    Results from duel fueler?

    I also have 8 bent rods in the garage:D
  17. bullfrogjohnson

    2001 T0 2004 MotorSwap 911

    X2....You can change the y-bridge and the passenger side intake manifold from the 01 to the 04. You will need to swap to the 01 wire harness and oil pressure sensor setup. The 01 oil pressure sensor is a 1 wire sensor compared to the 04 will have a 3 wire sensor. I dont believe the 01 ecm...
  18. bullfrogjohnson

    Results from duel fueler?

    X2, I ran my truck with 60% overs and ppe dual fuelers with a s475 for 2 years, completely stock motor. My rods bent before my stock head bolts even thought about stretching. It dynoed 741hp with raw tuning after I first put 2xcp3's on. I would say that going from holding 22k rail pressure...
  19. bullfrogjohnson

    Chevy1925 (James) Truck/motor build

    Dont feel bad james mine hasnt run since early october 2010:(
  20. bullfrogjohnson

    Nitrous detection

    Are you wanting to spray your truck or are you thinking someone in your class is spraying?
Top Bottom