Search results

  1. Dmax87

    LB7: Injector Advice

    For the copper washer I usually put a dab of grease or assembly lube on it then put on injector tip, this will make it stick on the injector. As for the cup, clean the head and cup very thoroughly, install new oring, smear red loctite on bottom mating surface of cup, sit down in the head and I...
  2. Dmax87

    LBZ prices and crack?

    https://cincinnati.craigslist.org/ctd/5314184375.html
  3. Dmax87

    New Whine/Whirring noise audible at idle/park

    Can't really tell where you're at with the camera in the video. Maybe try pulling the belt off and running it. Might have a pulley going south or power steering pump etc... If nothing there, might remove torque converter bolts and start engine and see if noise is still there or not.
  4. Dmax87

    LLY: T-case, front end and rear locker

    Or you can get on merchant automotive website and they explain the difference and point you to which case you have :thumb:
  5. Dmax87

    Trans Crapped The Bed :(

    Did mike have an answer for this issue?
  6. Dmax87

    Trans issue or????

    10-4. Will remove and inspect. Thanks
  7. Dmax87

    Trans issue or????

    I haven't disassembled them and checked but there is no movement in them from what I can tell. I was planning on trying some ujoints first though
  8. Dmax87

    Trans issue or????

    Not sure if I have a transmission issue, transfer case issue or driveline. The issue I'm having is after driving to work, I go to back in my spot and when I apply the brakes in reverse it almost feels like I hit something. It makes me look everytime. I installed a ppe stage 5 kit along with a...
  9. Dmax87

    New LML Crank for Build?

    In my experience, the machine shop needs the crank, rods being used, pistons, 1 set of rings and I can't remember if they wanted bearings or not. This is used for just a "balance" job. What Shane has is big $$$, internally balanced crank.
  10. Dmax87

    Bose issues

    Amp fixed the issue. Fyi, I think I'd rather take a kick in the face with a golf shoe than have to replace it again. Tight area, nothing comes out the way you would think and razor sharp plastic is always nice for the skin.
  11. Dmax87

    Bose issues

    I got a used amp coming from Hicksville auto recyclers. I figured $50 is cheaper than trying a new head unit
  12. Dmax87

    Bose issues

    Anyone???
  13. Dmax87

    Bose issues

    Hey guys gotta a question for yah that's out of my area of expertise. I have a 04 extended cab with the Bose system, I have also added subs and amp under the seat about a year ago. Stereo has been working great, Friday afternoon I go to turn it on and only my back speakers are working. With...
  14. Dmax87

    GoPro video of my truck.

    Yeah, I'm not high as f*** nor do I like colt 45. But cool video
  15. Dmax87

    Help: Need shop in Boca raton/Miami Florida

    Glow plug module is definitely a good place to check as it is incorporated in the data link. Also there are terminating resistors included in the data link. Not sure on which pins to check but you should be able to ohm out specific pins on the obd2 port and get a specific reading. I believe...
  16. Dmax87

    Broken flex plate sound?

    Agreed. I'll be ordering one
  17. Dmax87

    Thoughts?

    Hahahaha, I saw that too. That must put a beating on the engine.
  18. Dmax87

    Broken flex plate sound?

    At what point does the factory flex plate need to be upgraded to a billet unit? I'm sure there's guys running big power through the factory one. Just wondering if it's worth upgrading so this doesn't happen again.
  19. Dmax87

    Broken flex plate sound?

    Yanked the starter on it and took out the inner fender, all bolts were a little loose but from I can tell there is a crack in the flex plate closer to the center of it. Hoping that's the culprit for the noise. I removed all the bolts from the converter, slid it back a hair and started the truck...
  20. Dmax87

    Broken flex plate sound?

    10-4. Thanks mike. So it's possible for the noise to happen in certain scenarios? Rather than it being broken and making the noise all the time.