Duramax Diesels Forum

Duramax Diesels Forum (https://www.duramaxdiesels.com/forum/index.php)
-   Garage Sale (https://www.duramaxdiesels.com/forum/forumdisplay.php?f=15)
-   -   FS: Shop Cleaning (https://www.duramaxdiesels.com/forum/showthread.php?t=74118)

juddski88 11-22-2016 06:18 AM

Shop Cleaning
I have a couple unfinished projects that I need to finish and just took on another that is going to cost me more than my truck ever did.

I will update this list as I continue to find things hiding away:

Holset HC5A, cast compressor wheel, G-trim Turbine. $1500 OBO
I bought it as a new rebuilt turbo a few years ago, has sat on a shelf ever since.

HTT S482, FMW wheel, 87mm Turbine, Polished comp housing.$1300
I have .90 and 1.10 housings for it, if you want both then add $250. Turbo is used but is still in great condition, it spent 99.99% of its run time being choked by the small exhaust housing and limited to 52psi of boost.

Exergy 100% Over LLY Injectors. Used, built in 2009. $2000
Checked once in 2010 before I bought them, again in 2011 after I got the truck running, and have sat in the motor sealed up since late 2013.

Industrial Injection Double Dragon CP3, Prototype model. $1200
This is based off a dodge pump, built originally for Jess Spruill's race truck. I have it mounted as a remote pump with a II Flex line and a controller that Ben made for me. This pump has never skipped a beat for me. Price is just for the pump, but if the buyer is interested in the controller, HP line, and Wehrli A/C bracket mount with his polished wheel, I'll consider selling it all for $1900.

DPC Torque Converter, New since refresh in 2014, 3100 stall. $1100
For an Allison. To be honest, I have no idea what the parts specs are anymore. Phil always took care of me, and helped me out in a lot of pinches, as he does for so many other customers of his.

If my PM box fills up here, you can also email me at FreedomDieselNE@gmail.com for the fastest response.


juddski88 01-16-2017 11:43 AM

Bump, also have 6 good 2007 lbz injectors, had 120k miles. I pulled one to have it tested and it was well within bosch spec. Selling the six for $600 plus shipping.

juddski88 01-24-2017 04:14 PM

I'm lowering the price of the HC5A to $1,300 and the Double Dragon Pump to $1000.

juddski88 02-19-2017 05:44 AM

Tax time. Bump

ikeG 02-19-2017 06:58 AM

List the HC5 on pulloff.com. G-trim are in demand for pullers

Fasttoys450 02-19-2017 07:15 PM

Would you sell just 2 of the injectors

juddski88 02-20-2017 07:19 AM

I won't split up the 100 overs. They were a matched set and should stay that way

Fasttoys450 02-20-2017 12:35 PM

Not the 100 overs the 6 lbz injectors

juddski88 02-20-2017 05:06 PM

Yessir I'll split those up.

Fasttoys450 02-20-2017 06:03 PM

Pm sent

juddski88 02-23-2017 08:01 AM

Sale - pending payment for the LLY injectors.

juddski88 02-23-2017 11:06 AM


Originally Posted by 04jimc (Post 1051304)
List the HC5 on pulloff.com. G-trim are in demand for pullers

Good recommendation sir, thank you.those guys are hungry.

juddski88 02-26-2017 11:03 AM

I also found 4 full lbz/lmm Y-bridge assemblies, 2 lbz and 2 lmm egr cooler, 2 lly y-bridge assemblies, 3 lly egr coolers, several uppipes from all generations with the egr risers still intact, and some drivers side uppipes too.

Maybe a shop in California needs this stuff? Not sure how your emissions laws are hurting you guys out there:confused:

TheBac 02-26-2017 11:10 AM

I think Rick is still looking for egr uppipes, Tim. Might want to give him a jingle and ask if he wants them.

zf>allison 03-01-2017 07:46 AM

Pm sent on 100% overs:)

All times are GMT -7. The time now is 04:59 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.