Recent content by Tone72885

  1. Tone72885

    LBZ: Engine build/questions

    Following, I have the same parts list except for the billet mains. What about a socal flex plate and ATI balancer? Which would you use with a LML crank in an LBZ block?
  2. Tone72885

    Machine Shop

    im in Covington, so something close by would be nice. But if I can't find anyone, I guess I'll need to ship it out. Way too much money to half ass it.
  3. Tone72885

    Machine Shop

    I'm open to either depending on cost to do the short block. Have a shopping list of parts, but need the block checked out. Cracked and put a hole in number 2, it left a dime size rough spot on the wall.
  4. Tone72885

    Machine Shop

    What about Oregon or Idaho?
  5. Tone72885

    Machine Shop

    Anyone know of a good machine shop in Washington state for the duramax. Either cracked or put a hole in the piston so it's time to rebuild it. Thanks
  6. Tone72885

    LML CP4 Problems

    Wow! Probably best you go pound sand some place else. Most people here have more knowledge and experience in their thumb than you have in your in head.
  7. Tone72885

    Service trailer brake?

    I had the same thing happen on my truck, only did it on one of my trailers, found there was an exposed wire on the trailer brake wire going into the brakes.
  8. Tone72885

    Washington members, roll call

    Has anyone ever successfully set up a meet in Washington State?
  9. Tone72885

    Air Dog 4G VS FASS Titanium (2016)

    I didn't know that about the sump. When I installed the FASS on the Denali back in early 2012, it made all this noise from the get go. I looked around to see if anyone else was having the issue via Google and Forums and nothing popped up so i just figured it was how it ran and never looked at...
  10. Tone72885

    TWINNED S480 Billet 96mm 1.32 & 1.15 vs Batmowheel 87mm 1.1

    I stayed with the T6 flange, didn't wanna change out more pieces and create different variables. The truck has 235/85/16 tires on it, its a 1 ton dually. Im running in 5th gear anywhere from 55-70 when Im really watching the big turbo is doing. Before I twinned it, the truck just had a built...
  11. Tone72885

    Washington members, roll call

    Thank You!
  12. Tone72885

    TWINNED S480 Billet 96mm 1.32 & 1.15 vs Batmowheel 87mm 1.1

    So played around with the twin set up some on my LBZ. I started out with a billet 7 blade hooked to a 96mm wheel and a 1.32 housing. Does this thing scream LOUD!!! I use my trucks for towing so I need them to perform efficiently while towing. I quickly realized this 1.32 housing was not the...
  13. Tone72885

    Washington members, roll call

    Covington, WA
  14. Tone72885

    Air Dog 4G VS FASS Titanium (2016)

    I have a FASS 150 on my 2012 Denali and a Airdog 4G on my 2006 'Dooley', the AirDog is MUCH quieter than the FASS. The FASS is very loud and annoying and can be easily heard over the truck running (5in exhaust) sitting in the driver seat at a stop with the window down. The Airdog on the other...
  15. Tone72885

    Kinda new, have a few things to sell

    TOTALLY UNDERSTAND.... We've all seen the scams from here, CL, over the phone... Its frustrating that there are people out there who would do this to people. Almost 12 years in the Air Force, I've seen lots of shady stuff. As for the lack of posts, don't really have a reason why I didn't make...
See more
Top Bottom