rcr1978's latest activity

  • rcr1978
    rcr1978 replied to the thread Oil cooling.
    The LB7 cooler on my truck takes on average 20-30 degrees out of the oil temp, it actually does a really good job. I thought about the...
  • rcr1978
    rcr1978 replied to the thread Oil cooling.
    Here is some calculations for the OEM oil pumps based off gear sizes, diameter, tooth count. This is for both LB7-LMM and the LML oil...
  • rcr1978
    rcr1978 replied to the thread Oil cooling.
    I will get the p/n and try to look it up, fluidyne provided it. I ordered everything through them so I could get the shrowd and pick the...
  • rcr1978
    rcr1978 replied to the thread Oil cooling.
    It might have done a bit better if I had it up front but no room and I didn't want to hack any holes in the bumper. Here's some pics of it.
    • 20190917_153153.jpg
    • 20190917_153221.jpg
    • 20190917_153349.jpg
  • rcr1978
    rcr1978 replied to the thread Oil cooling.
    I'm running a decent size one from fluidyne, its the db-30616 single pass with there custom fan and shrowd. It's mounted up under the...
  • rcr1978
    rcr1978 replied to the thread Rattle at idle.
    Dipstick tube and down pipe is another place to check. Seen a few of those drive people nuts. They were mostly while driving though
  • rcr1978
    My front appears to be valved the same as the one James has there. The pellet is a pos and is pressed in on the inside of the shock...
  • rcr1978
    Cool thread, I have a set of the cheaper 2.0 non resi ones and also wasn't happy with the longevity. Mine had shaft pitting issues with...
  • rcr1978
    rcr1978 replied to the thread Rare Parts tie rod failure.
    Funiest thing I've heard all week :ROFLMAO: