M.A.M.'s latest activity

  • M.A.M.
    Any of you know what the crank and cam reading/count is supposed to be at idle? Looking at it on the scanner they are jumping around...
  • M.A.M.
    M.A.M. replied to the thread CP4 diagnose P228C P228B.
    Just wanted to leave an update that a new injection pump fixed the issue. We are back to hauling ass up the hills, and rail pressure...
  • M.A.M.
    M.A.M. replied to the thread New build for the Mistress.
    Torque down low increases the risk substantially. Sent from my iPhone using Tapatalk
  • M.A.M.
    M.A.M. replied to the thread New build for the Mistress.
    And broken parts, it sounds like. [emoji23] Sent from my iPhone using Tapatalk
  • M.A.M.
    M.A.M. replied to the thread Injectors.
    How much fuel was the right bank of injectors returning? Sent from my iPhone using Tapatalk
  • M.A.M.
    M.A.M. replied to the thread Injectors.
    You need the proper equipment/test stand to properly test flow and return. Even if warranty isn’t an issue, why do it twice or three...
  • M.A.M.
    M.A.M. replied to the thread Injectors.
    No to AutoZone, you’ll be doing it twice. What’s the enhanced injector test? Sent from my iPhone using Tapatalk
  • M.A.M.
    M.A.M. replied to the thread DuramaxDiesel.com Stickers.
    One 9” and one 13.5” in the dark print. Sent from my iPhone using Tapatalk
  • M.A.M.
    M.A.M. replied to the thread L5P build .
    Very few guys that have swapped the L5P into anything, even less that have put anything behind it other than an Allison. What does...
  • M.A.M.
    M.A.M. replied to the thread L5P build .
    What electronics will you use to run the engine? You should be able to bolt either a 6speed or a zf6 to it. What exactly was your...
  • M.A.M.
    M.A.M. reacted to 1TRIKHD's post in the thread My Country Boy Limo. 06 LBZ with Like Like.
    Decided to go with a bigger tire then wheel this time. Took the slicks off the 16x10 -25 offset raceline renegades, and put some...
  • M.A.M.
    M.A.M. replied to the thread P0652 & P2228.
    Does the vane position sensor move at all if you monitor that? If not, remove and manually move the plunger and see if anything changes...
  • M.A.M.
    M.A.M. replied to the thread 2015 or 2015.5? Owners, help me..
    Yes it is. It’s a Fuel Lab Velocity 200. Sent from my iPhone using Tapatalk
  • M.A.M.
    M.A.M. replied to the thread 2015 or 2015.5? Owners, help me..
    Picture of my gauges. Early 15, and have the A50/T14. Did you code the cluster to the ECM/BCM? Sent from my iPhone using Tapatalk
  • M.A.M.
    M.A.M. replied to the thread 2015 or 2015.5? Owners, help me..
    2015 MY trucks built before 8/14 had the A50/T14 TCM as pictured. 2015 MY built after 8/14 had the smooth case T87. The cluster you...