Recent content by kevincolyar
-
K
2002 LB7 Voltage Issues
The CTS3 says "voltage low" or the truck does? How long are you waiting to start the truck before it gives you that message? I'm approaching ten custom updates sent to my CTS3 from Edge to try to fix my boost gauge reading 14 psi at idle (and going up from there with load). Apparently my...- kevincolyar
- Post #23
- Forum: LB7
-
K
2002 LB7 Voltage Issues
Update: Another thing I stumbled across that points to the CTS3; The other morning I went to start the truck and my grip slipped while turning and I only got a crank, maybe two, without the truck starting. This was enough to have the CTS3 begin it's startup sequence. I immediatly started the...- kevincolyar
- Post #21
- Forum: LB7
-
K
2002 LB7 Voltage Issues
@mojito5000 it doesn't reset the radio when CTS3 is not plugged in. It also won't reset it when the truck is fully warmed up when I start it, and the CTS3 is plugged in. I assume it has to do with the cold weather and glow plugs. @scott_willerscheidt I've checked and cleaned the grounds I...- kevincolyar
- Post #19
- Forum: LB7
-
K
2002 LB7 Voltage Issues
@mojito5000 what kind of issues did your cts cause? I have the CTS3 (no juice) and the resetting of the factory stereo clock (when the truck is cold) is the only negative affect to the truck I've come across so far.- kevincolyar
- Post #16
- Forum: LB7
-
K
2002 LB7 Voltage Issues
Just had them load tested individually; tested great. Both are one year old AC Delcos.- kevincolyar
- Post #14
- Forum: LB7
-
K
2002 LB7 Voltage Issues
Having this same issue. Batteries and alternator checked out okay, replaced battery terminal bolts and cleaned connections, cleaned ground under driver side door. One thing I do have to add is that my clock seams to reset at the instant my Edge CTS3 starts reading gauges, as if the CTS is...- kevincolyar
- Post #12
- Forum: LB7