juddski88's latest activity
-
Ah yeah, I almost forgot.. I finally got the VR to square wave adapter design figured out where the T87 will accept it. Involved a... -
I'm back on the T14 swap this week. I've been working on the house, doing some remodeling, and a new roof. Went all metal roofing and...
-
juddski88 replied to the thread Brake issue.For what little it may be worth, I have not had good luck with Napa brake products in towing rigs. Premiums, fleet, didn't matter- they...
-
juddski88 replied to the thread Well there goes my chances of 9s this year.There are certain types of misalignment when they leak prolifically though. You have to be smart about where you place them in relation...
-
juddski88 replied to the thread Intercooler boot o-ring.MA sells them. Or if you have a good Parker store around you, you can match it up with them. Or you can measure it yourself and order online
-
Source: https://youtu.be/Wee1kKjVID0 Another teaser. This time testing an injector on the new board. The signal looks really good and...
-
Also received the T14 adapter prototype yesterday. Not bad for the first attempt. Terminals fit and release correctly. Robin the seal...
-
Received the two new switching options today from the Chinese rain forest. Along with a package of micr-clips and some Long needed...
-
I ❤️ CAD..
-
T14 Connector Revision # 5 Seal on wire terminals won't fit the 3.5mm pitch without overlaping the insulation crimps. Maybe if injecton...
-
I finally hacked my way in... Took some time, but the clock and GPIO's assigned, with a main loop running. Source...
-
juddski88 replied to the thread L5P Coolant drain and fill.The oil cooler housing is about as low and back as it gets. If you really are concerned about draining all of it, I'd drain from there.
