JAG91761's latest activity
-
-
Yes, the plate comes off with the 4 Phillips screws. The picture 2004LB7 attached above shows correct install order. The spring fits...
-
JAG91761 replied to the thread Failed visual test.Thanks Lennydmaxguy do you know if I can remove the plate with out removing the valvecovers? I order the parts, do you know if goes...
-
You'll need to remove the plate to know for sure. The rubber flange and spring are the important parts here.
-
So, if missing then he will need this kit
-
This is the diaphragm I mentioned. Looks like you can get replacements...
-
Actually, that is nothing but a tube with a Y connection. The "Positive" part of the system is a little diaphragm on each valve cover...
-
JAG91761 replied to the thread Failed visual test.it is not missing. Maybe the springs are bad or worn out?
-
-
JAG91761 replied to the thread Failed visual test.Thank You 2004LB7 will look into that I assume it does not when I bought the truck it had the PCV reroute.
-
Did smog check(CA), everything passed except pcv. I do not have the stock parts, but I re routed it back to the intake elbow and it’s...
