Chevy1925's latest activity
-
Chevy1925 replied to the thread May '24 Chat -- MayDay, a holiday or a cry for help?.I feel this. The old limo went through a trans every 2 years almost on the dot. Always for something different too. Price you pay to... -
Chevy1925 replied to the thread Valve lash.If it helps, when I helped Steve build his motor, he did his valve lash. Somehow, his went out of wack like yours did after setting it...
-
Chevy1925 replied to the thread Allison replacement quote question.Damn! We need to up our costs on built transmissions then [emoji1787] Unless Evan had a price increase I don’t know about, he’s not...
-
Chevy1925 replied to the thread Valve lash.I dunno, .040 is pretty damn big and can make some noise for sure. I’d make sure your rocker bridge bolts are torqued, push rods are...
-
Chevy1925 replied to the thread 01-10 Steering - Saginaw gear experts - What are reasonable expectations?.lol I told him we had the thread on here and he’d probably get inquires. You all name drop the hell out of me if you want. Ain’t no issue!
-
Chevy1925 replied to the thread L5p lifter failure .You pick your poison these days. You could have got a ford and have the cp4 explode, intercooler tube blow out, injector valve seals...
-
Chevy1925 replied to the thread CP4 Conversion kit.The regulator for the cp3 is special for the tunless kits so the ecm can run it via its voltage scaling.
-
Chevy1925 replied to the thread 5K RPM tuning a LML.Eh, valve float will be an issue at 4500rpm. It gets worse with more boost too. Also, stock turbo is waaaaaay the hell outside its map...
-
Chevy1925 replied to the thread Service brake system.Need a scanner that will read all the modules and pull codes. Probably have some stored ones in the abs module or others
-
Chevy1925 replied to the thread LML service bulletin.That or his new sensor isn’t jiving
-
Chevy1925 replied to the thread Grand Tracker continual build.I threw a tire on to see what it looked like and didn’t get a pic. The pic above is at full bump. Tire slightly rubs the radius arm at...
-
Chevy1925 replied to the thread 01-10 Steering - Saginaw gear experts - What are reasonable expectations?.The op messed with it and his return to center went away. I’ve messed with this adjustment a bunch because the rebuild boxes usually...
-
Chevy1925 replied to the thread Grand Tracker continual build.It doesn’t help I was being particular to make all the plate edges line up nicely so when I welded it all up, the weld lines were nice...
-
Chevy1925 replied to the thread Grand Tracker continual build.Took all damn day yesterday to fab all this, really didn’t think it would take that long but core support mounts are in and frame braces...