Bdsankey's latest activity
-
Bdsankey replied to the thread Help!! ECM Problems.I can get you a stock file. I do not have one for your OS but can acquire one. That service is $100 as I have to purchase that file or... -
Bdsankey replied to the thread LBZ Non-vgt turbo.It keeps coming back to “what you want to do”. A Garrett style turbo will be more responsive than any Borg, it’s just nature of the...
-
I checked voltage on the truck and the batteries were reading lower than normal voltage. I am guessing that from the truck sitting...
-
Bdsankey replied to the thread 24 L5P deleted now lighting issues.At this time the modules (ECM/TCM) must be removed from the truck and sent to HPTuners for 24+ Duramax. I'm with you, I'm guessing they...
-
My money is on the cluster. Steppers weren't the only parts that would fail on them. If there is any way you can "borrow" a known...
-
Bdsankey reacted to Turbo Performance's post in the thread Heatshields, heat wrap, turbo blankets with
Like.
Yep! Still making blankets! It'll be 18 years in September. :oops: Duramax specific? Or just stainless/Inconel heat shields in general? -
Depending in what stepper motors where used in the rebuild, it very well could still be the cluster. Those steppers where known to do that
-
Bdsankey replied to the thread Howdy Y'all.Welcome to the page!
-
Bdsankey replied to the thread Speedometer Reading Issue.I would check resistance/integrity of the wires from the sensor all the way to the TCM. Make sure nothing changes when you wiggle the...
-
Had him make me some manifold and up pipes blankets. They are nice.
-
Bdsankey replied to the thread Heatshields, heat wrap, turbo blankets.Hit him up directly or we are a dealer for his products as well. You won't be disappointed that's for sure.
-
Bdsankey replied to the thread LBZ Non-vgt turbo.Then an aftermarket VGT (JZ Mfg/Fleece/Duramax Tuner), 363/68/0.91, or 364.5/68/0.91 would be a great fit.
-
Bdsankey replied to the thread Heatshields, heat wrap, turbo blankets.He sure is still making blankets. His are the only brand I run/sell at my shop.
-
Bdsankey replied to the thread LBZ Non-vgt turbo.Welcome to the forum! To install an S300 style turbo you really have 2 main paths: 1) Bolt in turbo style produced by Smeding Diesel 2)...
-
Bdsankey replied to the thread lbz to a lly engine swap -- no start condition.Did you use your LBZ CP3 pump? What reading are you getting for rail pressure while cranking? Do you have any high pressure leaks? Any...